gpx5000

Only for the discussion of all other Minelab models of metal detectors that do not have there own forum.
Post Reply
hunter
Posts: 5
Joined: Tue Apr 26, 2011 8:59 pm

gpx5000

Post by hunter » Tue May 21, 2019 6:58 pm

hi all I just brought a gpx5000 and just wondering wats the best coil for hoard hunting in the uk the ones I have is coiltek 40x20 and commander 18inch dd and 11inch d and 11inch mono can some one help please



User avatar
Buriedbytime&dust
Posts: 585
Joined: Tue Jun 20, 2017 6:03 pm
Location: Suffolk
Has thanked: 191 times
Been thanked: 267 times

Re: gpx5000

Post by Buriedbytime&dust » Tue May 21, 2019 7:39 pm

I can't offer any advice unfortunately, but I have to ask whether you've used the 40 x 20 coil yet?

I saw one in use on Youtube and he looked like he was swinging a dining table! :-O

Filternozzle
Posts: 389
Joined: Wed Apr 17, 2013 12:08 pm
Location: UK
Has thanked: 5 times
Been thanked: 17 times

Re: gpx5000

Post by Filternozzle » Tue May 21, 2019 7:54 pm

Well you have the largest coil available from Coiltek, the drag coil 40x20", its probably Anti Interference as well. This coil is too large and heavy to put on the end of your stem and was made to be mounted on a home made rig. It would be dragged along by a quad bike.

A more practicable solution would be a 22" Goldstalker by Coiltek or their Elite 18". These are both mono coils so discrimination is not possible. Nexus have recently introduced a 30" Concentric carbon fiber coil which does discriminate and is remarkably light at only 1095 grams.

I would imagine the Nexuse 30" concentric coil would be your best bet. Why dont you contact them at Nexus.com for more information.
Updated NEXUS MP & Minelab GPX-5000 ::g

hunter
Posts: 5
Joined: Tue Apr 26, 2011 8:59 pm

Re: gpx5000

Post by hunter » Wed May 22, 2019 8:58 am

thanks I have not used them on land yet but air tested them I will make some thing on weels for the big 40x20 coil carnt waight to test them

jcmaloney
Posts: 2225
Joined: Tue Apr 12, 2011 9:17 am
Has thanked: 710 times
Been thanked: 356 times

Re: gpx5000

Post by jcmaloney » Wed May 22, 2019 10:21 am

I would make sure there was a hoard there first! :))
I had my GPX5000 purely for those situations.
Both were scattered hoards in arable land that had been well detected with pretty much everything else but the GPX still recovered more coins with the 18in DD.
As both sites get deep ploughed every 4/5 years due to the nature of the soil there are still odd ones appearing and there is no pot/purse remaining.
If (big if!) any turn up later this year then the CTX3030 with the 17in coil will "take the lead" on numbers. ::g
Opinions expressed on MY posts are mine and NOT those of any democratic organisation I volunteer for. ::g

Pommie Chris.
Posts: 17
Joined: Sun Jun 02, 2019 4:39 am
Been thanked: 4 times

Re: gpx5000

Post by Pommie Chris. » Sat Jun 15, 2019 10:22 am

I’m not a coiltek fan I use a 12inch nugget finder never comes off my 5000 in Aussie , but in the open field s your commander 18dd coil would be great , quiet and good ground coverage. The Commander coil is underrated , if I’m in a noisy area with emi or heavy mineralisation is a problem I all ways go back to a commander coil. The gpx would be used for finding deep targets in the uk, which is a good idea picking up what is left behind. I have done a lot of testing with coils and 11,12 14, inch coils goes deep and are comfortable to swing all day. In a open field 18 or 19 max for me , and keep your coil on the ground. And yes I’ve tested bigger coils. Pommie Chris.😎

Post Reply

Return to “Other Minelab Metal Detectors Forum”