Gmp program edit ok?

Only for the discussion of the Deus Metal Detector.
Post Reply
Apfelsaft
Posts: 3
Joined: Mon Nov 12, 2018 9:21 pm

Gmp program edit ok?

Post by Apfelsaft » Tue Nov 13, 2018 6:30 pm

Hello Everyone,

I am detecting metals since 2004 and since 2006 onwards with the help of my XP Goldmaxx Power(still have it as backup).

I am using the Deus for only 2 months now and therefore would like you to take a quick look at the program I am detecting with.

Program 2 GMP:
Disk-1,2
Sens 92->TX power 2
Freq 12,3->5 Töne:
120 -1,2
120 -1,2-10
400 10-31
565 31-85
733 85-99
Ironvol 3 (without function anyway)
Reactivity 2
Silencer -1
Audioresp 5
GB Pumping->GB Notch 86

Do you think running a negative disk like -1,2 is worth it in terms of depth gain or should I raise it to 3,5?

Greetings from Merkelny :-&



User avatar
Danzigman
Posts: 12269
Joined: Sun Aug 07, 2011 8:31 am
Location: Denmark - island of Fyn (Funen)
Has thanked: 208 times
Been thanked: 198 times

Re: Gmp program edit ok?

Post by Danzigman » Tue Nov 13, 2018 7:45 pm

Personally im not the type, that go changing settings and things so frequently.. But since I use GMP 99 % of the time, I do change little on settings..
All I do is lower discrimination to 4, 5 or 6... And set sensitivity little higer around 94 - 95.. (also dependig on soil) then I change to 4 tone,, rest I leav to fabric setting..
XP DEUS. GPP VII. GARMIN etrex 20.
http://s1222.photobucket.com/user/Danzigman/library/

Apfelsaft
Posts: 3
Joined: Mon Nov 12, 2018 9:21 pm

Re: Gmp program edit ok?

Post by Apfelsaft » Wed Nov 14, 2018 8:27 am

Hello Danzigman,

Thanks for your opinion.

Changing little to nothing on the
factory gmp-program is of course very comfortable to detect with in terms of stability and filtering out a huge amount of unwanted signals especially on iron infested sites.

But if a spot is pretty clean I like detecting it with a more "open" setting to catch deeper targets as well.

Greetings,
Apfelsaft

User avatar
Mancave-man
Posts: 524
Joined: Wed Oct 04, 2017 1:40 pm
Has thanked: 255 times
Been thanked: 242 times

Re: Gmp program edit ok?

Post by Mancave-man » Wed Nov 14, 2018 12:03 pm

As I use the GMP setting on my Deus 99% of the time here are my settings (which I have shared before), Disc set to 5,
Full tones (sometimes 5 tones)
Frequency to 12kHz (sometimes + or - shift depending on pinpointed interference)
Ground Balance to 88
and thats it. These settings serve me very well so am happy to leave them.

Good luck and happy hunting with your Deus.

P.S. I am still on v3.2. Too many poor stories about upgrading just yet.

User avatar
Buriedbytime&dust
Posts: 338
Joined: Tue Jun 20, 2017 6:03 pm
Location: Suffolk
Has thanked: 103 times
Been thanked: 136 times

Re: Gmp program edit ok?

Post by Buriedbytime&dust » Wed Nov 14, 2018 1:07 pm

Nothing wrong with that, in my opinion, Apfelsaft ::g

My general search program is also based on GMP, but has fewer tweaks. Audio Response gets boosted to 5, and manual GB set to 86, also on 5 tones. Everything else is left at factory settings.

I'm on V3.2, but I've used negative discrimination quite a bit on V4.1. With a zero setting in V3.2, or -6.4 in V4.1, I have to say I've never noticed the alleged depth gain that it brings, either on the testbed or in the field :-/

Apfelsaft
Posts: 3
Joined: Mon Nov 12, 2018 9:21 pm

Re: Gmp program edit ok?

Post by Apfelsaft » Wed Nov 14, 2018 6:21 pm

Hello Mancave-man and Buriedbytime&dust,

Thanks to both of you for letting me know your gmp parameters.

According to your replies I will simply stick to my setup ::g

Greetings,
Apfelsaft

Post Reply

Return to “XP DEUS Forum”