Goldmaxx power setting

Only for the discussion of the XP Gold MAXX Power Metal Detector.
Post Reply
TimberlandTigers
Posts: 74
Joined: Fri Aug 05, 2011 2:11 pm
Been thanked: 2 times

Goldmaxx power setting

Post by TimberlandTigers » Mon May 21, 2018 7:28 pm

Could anyone please advise me on a good setting for coins and hammered coins with my oldish GMP. Thanks in advance.



Ten pence!
Posts: 1166
Joined: Mon Dec 09, 2013 10:42 pm
Has thanked: 273 times
Been thanked: 300 times

Re: Goldmaxx power setting

Post by Ten pence! » Mon May 21, 2018 10:07 pm

Check out my long term test in the XP Goldmaxx section.

Digger Drew
Posts: 653
Joined: Wed Jan 26, 2011 4:10 pm
Location: Northampton
Has thanked: 7 times
Been thanked: 23 times

Re: Goldmaxx power setting

Post by Digger Drew » Mon May 21, 2018 10:34 pm

i normallr run mine sens to the red iron volume 12oclock,ground to the red marker,and iron threshold just out of auto and silencer at zero if you have a quiet site and want more depth you can put it in ii position, i have had many hammered coins and roman using this method also have had cut 1/8 and cut 1/4 pennies elizabeth portcullis halfpenny and silver maunds pennies from wiliam ad mary and charles ii this setting loves the small stuff and you will be getting items smaller than 177 pellets
2019(11 hammereds including Charles 1st half crown and a gold ring )

XP Goldmaxx + Goldmaxx power+ permission +time= finds

Junior
Posts: 1234
Joined: Sun Sep 13, 2015 5:53 pm
Has thanked: 320 times
Been thanked: 353 times

Re: Goldmaxx power setting

Post by Junior » Tue May 22, 2018 7:38 am

Might b worth giving Mr regtons a call they used to give out a small a4 booklet..... they might even email it ...they are normally good ::g

TimberlandTigers
Posts: 74
Joined: Fri Aug 05, 2011 2:11 pm
Been thanked: 2 times

Re: Goldmaxx power setting

Post by TimberlandTigers » Wed May 23, 2018 12:58 pm

Thank you for your replies. I will give those settings a go the next time I go out.

Post Reply

Return to “XP Gold MAXX Power Forum”