MDF Auction - Metal Detector Batteries
- Posts: 297
- Joined: Fri Dec 08, 2017 3:37 pm
- Location: East Devon
- Has thanked: 309 times
- Been thanked: 232 times
Am considering upgrading my detector, which may mean going from standard batteries to li.po. which seems to be the power source of choice in many new detectors. I already use 3000c cell batteries in my U.A.V. (quadcopter) and am very aware of the dangers they represent i.e:
Don't leave them charging on their own - at least be around to unplug when finished.
Make sure the correct charger is used and the batteries are balance charged so all cells are equally changed.
Don't use if undercharged.
Be aware they can present a fire risk which can be difficult to extinguish.
I am presuming; and may be wrong on this, that this may apply to any li.po. battery used in a detector.
I appreciate that a malfunctioning battery whilst in flight represents a different problem to one that occurs in/on a field or beach.
So ! - my question is: are they safe to use and charge and are they different in any way to a model aircraft/u.a.v. li. po. battery.?
One of the major probs I have found is that pre charging the battery and then perhaps being unable to use it (and thus having to leave it fully charged) is not to good for their life span.
Perhaps I am overcomplicating things but when the replacement cost is close to £100 I am factoring this into the ultimate choice.
If anyone has used li.po's for any length of time on a detector, I'd be grateful for any responses.
Many thanks in advance.
- Posts: 2566
- Joined: Thu Nov 11, 2010 11:16 am
- Location: Swingin' un Diggin'
- Has thanked: 18 times
- Been thanked: 81 times
Whichever type of machine you upgrade to will have advice on what types of batteries to use and charging etc. As long as items aren't left charging unattended on a surface that might get hot itself then you ought to be ok.