- Mega B
- Posts: 3298
- Joined: Sun Nov 27, 2011 5:59 pm
- Has thanked: 44 times
- Been thanked: 100 times
The only real way and give some indication is by placing a wedding ring or something that you can then get a basic guide line target i.d from down on the ground and past the coil over,then try and remember what the target i.d and audio tells you.
- Posts: 1416
- Joined: Sun Jan 22, 2017 12:25 pm
- Location: Newbury
- Has thanked: 522 times
- Been thanked: 637 times
- Posts: 3909
- Joined: Thu Sep 12, 2013 2:47 pm
- Location: Cheshire
- Has thanked: 277 times
- Been thanked: 908 times
Diameter, thickness, cracked, near iron/coke, orientation and so on.
Manual says its 38 - 55 but a gold ring was posted on here at 72.
Ground makes the big difference. Depending on how it ground balances it will move the scale up or down.
Ring pulls generally come out at 35 - 50 so if you are digging ring pulls you will not be missing gold.
Does mean you can't just look for gold and discriminate everything else out.
- Posts: 240
- Joined: Tue Jun 12, 2012 6:59 pm
- Location: Surrey
- Has thanked: 8 times
- Been thanked: 9 times
On the gold racer the earing comes out as foil ,a thin chain as iron and again the ring up in the 60's
Unfortunately its a case of digging everything there is no definitive gold region
- Posts: 60
- Joined: Fri May 02, 2014 3:05 pm
One 22 carat, and the other 9 carat.
Both gave a signal of 62 in 3 tone, gain at 85.
Also a gold half sovereign, and that was also at 62 with the same settings.
All on different ground, and different depths. Normally signals in that range turn out to be lead.
I hope that helps
- Posts: 29
- Joined: Tue Aug 22, 2017 7:28 pm
- Location: Hampshire
- Has thanked: 11 times
- Been thanked: 8 times
Bypassed two signals in that range yesterday thinking it would be more modern junk......D'oh
Thanks for the heads-up; I'll be digging those 40's from now on!
Makro Racer, Garrett pro pointer and digger
- Posts: 1974
- Joined: Tue Apr 12, 2011 9:17 am
- Has thanked: 364 times
- Been thanked: 241 times
If you think you can wander around "just digging gold" you will get bored very quickly!!
Start defining between ferrous & non-ferrous first. Gold, silver & lead will all come in fairly close.....periodic table & all that lark!