All discussion specific to the Cscope CS3MXI Metal Detector.
- Posts: 5
- Joined: Tue Jan 10, 2017 6:41 pm
Hello I'm new to detecting and got myself a 3mxi as a newbie don't know nothing about detectors can
You tell me if this detector is ok to do Beach and if it's ok for a beginner like myself?
- Posts: 83
- Joined: Wed Feb 19, 2014 8:36 am
- Been thanked: 1 time
if your going to do beaches get a cs4psi I recon the 3mxi will false on the wet sand.
- Posts: 9480
- Joined: Tue Sep 16, 2008 11:59 am
- Location: UK South Coast
- Has thanked: 158 times
- Been thanked: 549 times
Should work ok on the dry sand but as vespaman noted will struggle on the wet mineralised stuff.
- Posts: 39
- Joined: Wed Jun 13, 2018 5:53 pm
- Been thanked: 6 times
I used the 3mx on the wet sand and it did surprisingly well.Don't overcook it on the sensitivity and rotate the discrim knob until the machine runs stable.If you can put up with a little bit of chatter you can reduce the discrim a little for extra depth.
Not the greatest on the wet stuff but it can work.......and get reasonable depth which is surprising.
Great little machine for beginners and experienced users.
- Posts: 4502
- Joined: Thu Sep 12, 2013 2:47 pm
- Location: Cheshire
- Has thanked: 370 times
- Been thanked: 1261 times
Not all wet sand is the same.
Nice even will be the best to look for
You might have to crank up the discrimination and/or lower the sensitivity but even then some wet sand will you round the bend.
Get out and try it you will soon get a feeling as what's possible