Cscope 6 MX follow up post ( VALUE) now purchased myself and off for a SERVICE

All discussion specific to the Cscope CS6MXI Metal Detector.
Post Reply
garrettoldboy
Posts: 717
Joined: Fri Jun 22, 2018 8:46 am
Has thanked: 138 times
Been thanked: 288 times

Cscope 6 MX follow up post ( VALUE) now purchased myself and off for a SERVICE

Post by garrettoldboy » Thu Aug 02, 2018 9:21 am

hello, to follow on i decided to buy this machine myself, having used a C scope many years ago, cannot remember model but it worked well and with some good finds, anyway looking at the 6 MX it seemed to work on the same lines as a TROY 5 a friend had, I decided to send it off to Cscope as the service cost seemed very reasonable, cheers



garrettoldboy
Posts: 717
Joined: Fri Jun 22, 2018 8:46 am
Has thanked: 138 times
Been thanked: 288 times

GOOD SERVICE FROM C Scope

Post by garrettoldboy » Wed Aug 15, 2018 5:39 pm

just to add good service by C scope as i now have the 6 MX back so will get out friday and give it a proper go, CHEERS

diggerdave1
Posts: 184
Joined: Fri Jun 10, 2011 3:28 pm
Location: Bristol/
Been thanked: 85 times

Re: Cscope 6 MX follow up post ( VALUE) now purchased myself and off for a SERVICE

Post by diggerdave1 » Wed Aug 15, 2018 9:08 pm

Goodluck buddy..
Goodhunting :)

Kevanwhitmore
Posts: 10
Joined: Tue Aug 07, 2018 4:36 pm
Has thanked: 1 time
Been thanked: 1 time

Re: Cscope 6 MX follow up post ( VALUE) now purchased myself and off for a SERVICE

Post by Kevanwhitmore » Tue Sep 25, 2018 9:22 am

How’s it going ? I just purchased my 6mxi after a 35 yr break , So far I’m glad I chose this over Others I shortlisted ,, Just getting to grips with the settings 👌

garrettoldboy
Posts: 717
Joined: Fri Jun 22, 2018 8:46 am
Has thanked: 138 times
Been thanked: 288 times

Re: Cscope 6 MX follow up post ( VALUE) now purchased myself and off for a SERVICE

Post by garrettoldboy » Tue Sep 25, 2018 8:38 pm

Kevanwhitmore wrote:
Tue Sep 25, 2018 9:22 am
How’s it going ? I just purchased my 6mxi after a 35 yr break , So far I’m glad I chose this over Others I shortlisted ,, Just getting to grips with the settings 👌
hello, there are some good settings if you look on some web sites or ask Cscope, on disc setting i used a rusty nail to null out iron so set control just past that and dig everything else.

Post Reply

Return to “CScope CS6MXI Forum”