All things V6

Only topics related to the Blisstool V6 Metal detector in this section, Off topic posts will be removed.
Post Reply
Foggy
Posts: 358
Joined: Wed Feb 23, 2011 10:45 pm

All things V6

Post by Foggy » Sat Feb 14, 2015 4:52 pm

Hi Guys
This topic is designed for V6 users. Settings for different ground, experiences, tips and tricks



allmetal
Posts: 155
Joined: Sun Oct 26, 2014 9:52 pm
Has thanked: 34 times
Been thanked: 30 times

Re: All things V6

Post by allmetal » Sat Feb 14, 2015 10:15 pm

Reading your other post on setting up the V5 Foggy I think I have not been turning up my Threshold after ground balancing my V6 need to try that next time I'm out thanks for the tip. ;)

So far I have only around 10hrs or so of field time with my Blisstool think I'm getting more to grips with it now, It is very sensitive to very small targets in an air test can't say that I have managed to get it that way in the ground so far.

Foggy
Posts: 358
Joined: Wed Feb 23, 2011 10:45 pm

Re: All things V6

Post by Foggy » Sat Feb 14, 2015 11:38 pm

Hello Allmetal
Yes turning up the threshold after ground balance isn't mentioned anywhere in the manual, just get it to where your machine starts to chatter, then back it off so it's quiet, it will bring you depth and some sensitivity.
Regards
Foggy

Post your settings here Allmetal, I've no experience with the V6, it might help other users thanks. ::g

Junior
Posts: 1016
Joined: Sun Sep 13, 2015 5:53 pm
Has thanked: 219 times
Been thanked: 261 times

Re: All things V6

Post by Junior » Fri Oct 16, 2015 5:30 pm

Had mine since Dec 14 still struggle with it can't seem to ground balance it so always use ferrite ring rightly or wrongly. Seems to like a bit of iron regardless of where dd is. And seems sparky signal wise. My settings are. Gain 3 dd 8.5. dis 4. Dis sw 3/2. sil 2. Thres. 5 G. C. 6. G f 5. Freq. max. Tone max.

Post Reply

Return to “Blisstool V6 Model”