Early present to myself

Garrett Ace 400i Metal detector Topics Only.
Post Reply
User avatar
Muddyknee
Posts: 667
Joined: Mon Oct 29, 2018 7:05 am
Has thanked: 310 times
Been thanked: 359 times

Early present to myself

Post by Muddyknee »

Just ordered my 400i,anything I need to know?
Settings,quirks etc.
Cheers.


People don't change when they see the light.....
......they only change when they feel the heat.
Nox 800,that is all.
NCMD No 19622

User avatar
Muddyknee
Posts: 667
Joined: Mon Oct 29, 2018 7:05 am
Has thanked: 310 times
Been thanked: 359 times

Re: Early present to myself

Post by Muddyknee »

I need that iron tone in my life. B-)
People don't change when they see the light.....
......they only change when they feel the heat.
Nox 800,that is all.
NCMD No 19622

Hairyhands
Posts: 162
Joined: Sat Mar 31, 2018 10:40 pm
Has thanked: 35 times
Been thanked: 79 times

Re: Early present to myself

Post by Hairyhands »

Good luck. We will both be building and reading tomorrow lol

User avatar
Oxgirl36
Moderator
Posts: 12714
Joined: Sun Jul 10, 2016 6:54 pm
Location: A Lancastrian living in sunny Oxfordshire
Has thanked: 5188 times
Been thanked: 6007 times

Re: Early present to myself

Post by Oxgirl36 »

The excitement of a new detector is brilliant :)) . Enjoy ::g
Carpe vinum

XP Deus !!£$ I use the HOT programme on 17khz, reactivity at 2.5 on v5.21 with the X35 11” coil

User avatar
Muddyknee
Posts: 667
Joined: Mon Oct 29, 2018 7:05 am
Has thanked: 310 times
Been thanked: 359 times

Re: Early present to myself

Post by Muddyknee »

Hairyhands wrote:
Sun Nov 25, 2018 10:05 pm
Good luck. We will both be building and reading tomorrow lol
Batteries charged,trowel sharpened.
Gonna wear my boots tonight in anticipation,no sense in wasting any time.......
People don't change when they see the light.....
......they only change when they feel the heat.
Nox 800,that is all.
NCMD No 19622

JonM
Posts: 108
Joined: Mon Dec 25, 2017 5:54 pm
Location: Derbyshire
Has thanked: 26 times
Been thanked: 46 times

Re: Early present to myself

Post by JonM »

I hope that you are getting along nicely with your 400i Muddyknee. The 400i was my first detector and I still have it today, I have a very fond spot for these machines and mine will always be a firm favourite.
Makro Multi Kruzer (KR28 and AF28 coils).
Minelab Equinox 800.
Nokta Pointer.
Garrett Pro-Pointer AT.
Diamond Digger.
Gladius Stainless Spade.
DARC Member.
NCMD Member.

garrettoldboy
Posts: 717
Joined: Fri Jun 22, 2018 8:46 am
Has thanked: 138 times
Been thanked: 288 times

Re: Early present to myself

Post by garrettoldboy »

hello, how you getting on with the 400i ? i only used my ace on one setting

User avatar
Muddyknee
Posts: 667
Joined: Mon Oct 29, 2018 7:05 am
Has thanked: 310 times
Been thanked: 359 times

Re: Early present to myself

Post by Muddyknee »

Run it in jewelry mode with sensitivity down two notches in trashy areas.
But in 'cleaner' areas I run custom mode with disc two notches down and sensitivity one notch down.
On both settings I leave iron audio off,only using it to double check targets.
This machine loves shotgun shells.........
People don't change when they see the light.....
......they only change when they feel the heat.
Nox 800,that is all.
NCMD No 19622

JonM
Posts: 108
Joined: Mon Dec 25, 2017 5:54 pm
Location: Derbyshire
Has thanked: 26 times
Been thanked: 46 times

Re: Early present to myself

Post by JonM »

I find Iron audio useful in areas such as entrances between fields where there has been obvious agricultural traffic etc (tractor relics).
Makro Multi Kruzer (KR28 and AF28 coils).
Minelab Equinox 800.
Nokta Pointer.
Garrett Pro-Pointer AT.
Diamond Digger.
Gladius Stainless Spade.
DARC Member.
NCMD Member.

Post Reply

Return to “Garrett ACE 400i Forum”