ALERT The MDF has a monthly Prune of all Members that have Zero Posts to their Accounts to Free up Resources. However Just 1 Single Post will keep your account open indefinitely.

Best setting for AT Max

Garrett AT Max Forum
Garrett AT Max Metal detector Topics Only.
Post Reply
Onchanman
Posts: 23
Joined: Sun Aug 07, 2016 4:59 pm
Been thanked: 3 times

Best setting for AT Max

Post by Onchanman »

Does anybody have tips on which frequency would be best on farmland I had an old Euro ace which produced some nice finds but to date I am drawing a blank on my AT Max so many Im thinking that I should stop using the same modes as I used to use on my old Euro. I tend to set on coins as the constant whining of all metal drives me nuts. Am I missing out on finds by not using all metal?

detecting rod
Posts: 231
Joined: Mon Jul 01, 2019 1:52 pm
Has thanked: 11 times
Been thanked: 102 times

Post by detecting rod »

think coins with alot of detectors are set up for american market so would miss alot ,can you not run on all metal mode and notch out iron?

User avatar
Muddyknee
Posts: 897
Joined: Mon Oct 29, 2018 7:05 am
Has thanked: 340 times
Been thanked: 407 times

Post by Muddyknee »

Assuming the same set up as my 400i,I usually run custom with first three notches knocked out and sensitivity down one or two notches,depending on contamination.
People don't change when they see the light.....
......they only change when they feel the heat.
Nox 800,that is all.
NCMD No 19622

Onchanman
Posts: 23
Joined: Sun Aug 07, 2016 4:59 pm
Been thanked: 3 times

Post by Onchanman »

Thanks Folks I will take your advice and try new methods

Onchanman
Posts: 23
Joined: Sun Aug 07, 2016 4:59 pm
Been thanked: 3 times

Post by Onchanman »

Thanks for that all. I will take in all advice .

Post Reply

Return to “Garrett AT MAX”