T2 Classic All Metal Mode

Topics related to Teknetics metal detectors here, Off topic posts will be removed.
Post Reply
Posts: 19
Joined: Mon Apr 17, 2017 10:06 am
Location: Hastings. East Sussex.
Has thanked: 7 times
Been thanked: 1 time

T2 Classic All Metal Mode

Post by ChrisWilson618 » Mon Jul 23, 2018 5:32 pm

Purely out of interest, do any of you use the 'All Metal' mode?
If you do or if you have but prefer 'Discrim' mode I'd be interested to hear your reasons.
I'd be grateful if the replies could come from people who have used both modes, as this will give me a better understanding of real-world experiences.

Thank you.

If in doubt, BANG OUT.

Sweep 88
Posts: 35
Joined: Wed Jan 04, 2017 7:39 pm
Has thanked: 4 times
Been thanked: 27 times

Re: T2 Classic All Metal Mode

Post by Sweep 88 » Mon Jul 23, 2018 6:53 pm

Bit of an ear bashing on all metal mode . Used mine on 1+ tones sensitivity 75 /80 and disc on 10 that's slight discrimination and still very good depth .Watch the metre all 20s and 30s were iron .
A good deep machine found a lot with mine. good on hammered , still use it on ploughed fields.
Also took the stock coil off and went for Mars tiger coil and also large cors cannon coil.
Find rate went up
Arado 120b. Tesoro Toltec 100 . Minelab Safari + Detech 13" coil.
C Scope 1220XD + 10" coil Teknetics T2 LTD Cors Cannon Coil + Mars Tiger. Garrett Pinpointer.
Minelab Equinox 800.

Posts: 255
Joined: Sat Jun 11, 2016 7:54 pm
Location: Nottinghamshire
Has thanked: 165 times
Been thanked: 112 times

Re: T2 Classic All Metal Mode

Post by peteh » Wed Jul 25, 2018 5:22 pm

I use it to check a target, I set the sensitivity quite high in A/M.

If I find an iffy target I then switch over to A/M just to check it isn't grunting due to the target being just that bit too deep for discrimination mode to give a clear signal.

Also i use it if the signals are very few and far between.
In some case it has helped me get closer to electric fences which the T2 hates
Equinox, T2 classic, GP Pointer and a bucket full of optimism :D

Posts: 717
Joined: Fri Jun 22, 2018 8:46 am
Has thanked: 138 times
Been thanked: 288 times

Re: T2 Classic All Metal Mode

Post by garrettoldboy » Thu Jul 26, 2018 8:23 am

hello, most relic hunters use all metal mode as all finds will give a better history of say old war plane parts, can also be a good way to pinpoint,

Posts: 49
Joined: Tue Nov 07, 2017 8:04 pm
Has thanked: 24 times
Been thanked: 7 times

Re: T2 Classic All Metal Mode

Post by englishkid19 » Tue Aug 21, 2018 10:08 pm

use all metal if the ground is not too trashy ( signal rich)...it goes deeper and is still very accurate.
on trashy grounds AM is too much for my ear
Teknetics T2 & Deteknix wireless
GP pointer (<does the job >)
Follow on instagram... dirt_scanner

Post Reply

Return to “Teknetics Forum”