- Posts: 3831
- Joined: Thu Nov 04, 2010 5:08 pm
- Location: Sunny Lancashire
- Has thanked: 749 times
- Been thanked: 635 times
I know it's a little rough around the edges (literally) but I think I know where I'm going wrong
I'll have another go with a different coin at the next attempt.......
Please click on this link: https://skfb.ly/6uuRp
You can alter all sorts of settings yourself using the "model inspector", third symbol at the bottom right of the screen.
You can also zoom in/out too as well as making it full screen!
Thanks for looking
Follow us LIVE on Twitter...... @Britains_PAST ..and check our blogs....
- Posts: 374
- Joined: Thu Mar 17, 2016 12:07 pm
- Has thanked: 125 times
- Been thanked: 126 times
I tried a Roman coin but the software had trouble identifying both sides of the coin as a single object, pressumably because the side view was too thin to pick up a continuation of the same object.
I've the pictures on a flat surface instead and hope that'll work, does mean only one side is visible though
- Posts: 1184
- Joined: Fri Sep 06, 2013 2:53 pm
- Has thanked: 2135 times
- Been thanked: 483 times
Very good, thanks for taking the time.
There`s probably a button on there somewhere that when you hit it, spins the coin up in the air and you can play heads or tails.
Seriously though, a very good piece of technology you have shared with the forum, that brings artifacts to life and will enhance the identification process.
In areas of industry, this would win the award for technological breakthrough of the year.
Garrett 400 I