Adding a liner to catch the smaller targets

Please feel free to post topics about metal detecting sand scoops here.
MDF Auction - Metal Detecting Scoops
Post Reply
Jungle
Posts: 505
Joined: Fri Oct 07, 2011 1:49 pm
Has thanked: 56 times
Been thanked: 51 times

Adding a liner to catch the smaller targets

Post by Jungle » Wed Jul 11, 2018 10:59 pm

Looking to get a type r scoop but the 14mm holes are too big for river work.
Has anyone fitted a removable liner to catch the smaller stuff? Probably 8mm.
Any design tips welcome.


DEUS 9" Elliptical, 9", 11" and 13" coils, MI-6, Propointer, WS4 x 2, 2nd shaft (Upgrade path:- F75+Sunray, X-terra-50)

User avatar
sweepstick47
Moderator
Posts: 8668
Joined: Sun Nov 27, 2011 8:21 pm
Location: North Lincolnshire
Has thanked: 1206 times
Been thanked: 1946 times

Re: Adding a liner to catch the smaller targets

Post by sweepstick47 » Wed Jul 11, 2018 11:41 pm

Hello 'Jungle', Just a thought, the use of a 'fine'wire mesh may be the cheapest and easiest solution but I'm not sure of the sizes of mesh available. A local hardware store would be the best best for obtaining a small sample. A trawl of the usual internet suspects may prove useful in identifying the sizes available to you.

Let us know how you get on with the mod. Good Luck ::g Regards
A disservice is no service at all in my book ::g

User avatar
Easylife
Posts: 3561
Joined: Mon Apr 24, 2017 9:23 pm
Has thanked: 702 times
Been thanked: 1770 times

Re: Adding a liner to catch the smaller targets

Post by Easylife » Wed Jul 11, 2018 11:46 pm

You would no doubt do better to get a scoop with smaller holes to start with for ease of use. The holes on my Evo 360 are 14.4mm diameter but found that on the beach any metallic finds which fell through were not really worth worrying about and guess at worst I could just lose the odd ear-ring stud. I'd like an r-scoop for tougher conditions also but the 360 seems to cope reasonably well. Hammered farthings would possibly fall through the holes also but out of interest what very small finds are you expecting from the river?
Nox 800, 15" coil & Garrett carrot.
Deus V4.1, 11" coil, 9" HF coil & MI-6.
White's TDI SL

User avatar
sweepstick47
Moderator
Posts: 8668
Joined: Sun Nov 27, 2011 8:21 pm
Location: North Lincolnshire
Has thanked: 1206 times
Been thanked: 1946 times

Re: Adding a liner to catch the smaller targets

Post by sweepstick47 » Thu Jul 12, 2018 12:06 am

u;@ Now there's a real poser of a question. I suspect the answer is to expect all unexpected finds, as to what size the unexpected finds might be I, reckon that's yet another poser and it's now getting quite late:D Regards ss47
A disservice is no service at all in my book ::g

Jungle
Posts: 505
Joined: Fri Oct 07, 2011 1:49 pm
Has thanked: 56 times
Been thanked: 51 times

Re: Adding a liner to catch the smaller targets

Post by Jungle » Thu Jul 12, 2018 7:51 am

Easylife wrote:
Wed Jul 11, 2018 11:46 pm
You would no doubt do better to get a scoop with smaller holes to start with for ease of use. The holes on my Evo 360 are 14.4mm diameter but found that on the beach any metallic finds which fell through were not really worth worrying about and guess at worst I could just lose the odd ear-ring stud. I'd like an r-scoop for tougher conditions also but the 360 seems to cope reasonably well. Hammered farthings would possibly fall through the holes also but out of interest what very small finds are you expecting from the river?
I have two, possibly three roman river crossings and a stretch next to a DMV, so small mimims and maybe cut halves. Alternatively I could put a very fine mesh in and dump content on to a floating sieve
DEUS 9" Elliptical, 9", 11" and 13" coils, MI-6, Propointer, WS4 x 2, 2nd shaft (Upgrade path:- F75+Sunray, X-terra-50)

Post Reply

Return to “Metal Detecting Scoops”