XP Adventis 2 .. What is the right order 4 the connector ?

Topics related to XP metal detectors here, Off topic posts will be removed.
XP Videos
Post Reply
win9x
Posts: 2
Joined: Tue Mar 07, 2017 4:08 am

XP Adventis 2 .. What is the right order 4 the connector ?

Post by win9x » Tue Mar 07, 2017 6:13 am

I have xp adventis 2 and the connector broken and i need to re welding it but i don't know the right order for that.. Please help very urgent

if any one have the same device he can open it and give me the right order

thanks you all
You do not have the required permissions to view the files attached to this post.



nellyt5
Posts: 295
Joined: Sun Oct 21, 2012 1:01 pm

Re: XP adventis2 .. what is the right order 4 the connector

Post by nellyt5 » Tue Mar 07, 2017 8:38 am

if that's the inside of the control box and its the connector to which the coil plugs into ,then its proper bodged, it should be a ribbon wire that simply plugs into the little white socket on the circuit board,i replaced the same part an adx 150 and it was £27 inc p&p from our friendly guys at REGTONS,
hope this helps
rgds nel
xp adventis 2 & ws1,s

nellyt5
Posts: 295
Joined: Sun Oct 21, 2012 1:01 pm

Re: XP adventis2 .. what is the right order 4 the connector

Post by nellyt5 » Tue Mar 07, 2017 9:00 am

I think it should be something like this, this is the knackered one I replaced ::g
You do not have the required permissions to view the files attached to this post.
xp adventis 2 & ws1,s

User avatar
Mega B
Posts: 3304
Joined: Sun Nov 27, 2011 5:59 pm
Has thanked: 42 times
Been thanked: 102 times

Re: XP adventis2 .. what is the right order 4 the connector

Post by Mega B » Tue Mar 07, 2017 9:13 am

Looks like someone did not have a clue in what they have been doing,using all the same wire colouring as well,also the other comment 'welding' rather than using the proper terminology of soldering.

You asked the same question on the US forum and they could not suggest anything,the only suggestion that i can offer is either send it to Regtons and see what they can suggest or buy the flat ribbon cable,it may seem expensive but its cheaper than totally destroying what is a very good detector.
Nexus MP,Nexus SE,TDI Pro,Fisher TW-5 twin box,Equinox,Deus.

win9x
Posts: 2
Joined: Tue Mar 07, 2017 4:08 am

Re: XP adventis2 .. what is the right order 4 the connector

Post by win9x » Tue Mar 07, 2017 1:20 pm

the cut happen from the pins side not the board
there are 5 pins
if ANY ONE HAVE THE SAME detector just please open it and take a pic for the same place and i can do the rest

Post Reply

Return to “XP Forum”