Only topics related to the Garrett ace 150 metal detector here.
- Posts: 45
- Joined: Fri Sep 27, 2013 5:34 pm
I have been out today in a stubble field and now and then as the detector coil hits a bit of stubble I get a signal of coins but go over it again and again but don't get another tone?
Am I missing coins or is this just when the coil gets knocks?
I have marked the areas in case I get any answers on here
GARRETT ACE 150
1 old number plate
3 horse shoes
1 musket ball
- Posts: 263
- Joined: Sun Dec 30, 2012 6:49 pm
- Location: North Yorkshire
This happens sometimes to everyone at times I think, I know it does with me if I swing and hit a hard bit of stubble or a big mound of hard earth etc it will beep. Coils are quite sensitive, hope you do have lots of coins though!
XP Deus 3.2
Garrett Pro Pointer
Joan Allen Hercules Spade
Evolution Extreme Blade & Camo Sheath
- Posts: 3303
- Joined: Sun Nov 27, 2011 5:59 pm
- Has thanked: 42 times
- Been thanked: 101 times
Its usually caused by hitting the stubble,not alot you can do about really,if the stubble is still stiff as in this year harvest then most people use a small 5'' stubble busting coil as it can then get in between the stubble,if its rotten stubble then it should be alright,the worst type of stubble is rape stubble as that is like cane.
It happens with most coils,not alot you can do about it really but just take it slowly
- Posts: 156
- Joined: Sat May 18, 2013 3:19 pm
- Location: Bucks
- Has thanked: 1 time
Yep, just one of those things, it happens to me too. After a while you get to ignore those signals as your brain realises you hit something!
- Posts: 2215
- Joined: Thu Apr 11, 2013 8:47 pm
- Location: Stoke-on-Trent
- Has thanked: 9 times
- Been thanked: 17 times
Deffo the stubble mate, happened all the time with when i had the 250, even on pasture when i caught a straggly piece of grass. You'll get used to it.
- Posts: 8035
- Joined: Fri Feb 24, 2012 1:02 pm
- Has thanked: 10 times
- Been thanked: 25 times
its just one of those things m8 .as long as you double check and if no signal then walk on .or if you want to pull the stubble out then go over it ,if that would put your mind at rest . sometimes turning the sens down a bit helps
MAKRO pro pointer
always live for today and worry about tomorrow when it comes
- Posts: 2266
- Joined: Fri Nov 23, 2012 6:36 am
- Has thanked: 36 times
- Been thanked: 121 times
Just make sure the coil cable isnt too loose and hanging over the coil, apart from that its as already said, coil sensitivity
lots of MD related stuff