Minelab E-Trac Emulator - Download

Only for the discussion of the Minelab E-TRAC metal detecting within this forum.
Post Reply
User avatar
mrix
Founder
Posts: 8868
Joined: Tue Sep 16, 2008 11:59 am
Location: UK South Coast
Has thanked: 108 times
Been thanked: 467 times
Contact:

Minelab E-Trac Emulator - Download

Post by mrix » Tue Feb 17, 2009 4:08 pm

Hi all, Minelab have released a Emulater, its a bit like actually using a virtual online detector before you actually buy the machine to help get you used to the controls..
Its really good :) The Download link is below.
Minelab E-Trac Emulator

Also below is a list of additional files that can be used with it ::g

Download for English Coins - ETrac Emulator English Coins

Download for USA Coins - ETrac Emulator USA Coins

Download for Common USA Items - ETrac Emulator Common USA Items

Download for Silver and Jewellery - ETrac Emulator Silver Jewellery

Cheers all
mrix



Finnbass
Posts: 19
Joined: Sat Oct 16, 2010 11:01 pm
Location: St. Austell, Cornwall

Re: Minelab E-Trac Emulator Download

Post by Finnbass » Sun Oct 24, 2010 12:08 am

I downloaded the emulator programme the other week and have found it very useful. It's well worth tracking down the other files such as those mentioned by jonb67 and others which can be found on the minelabowners.com forum.

I've spent a reasonable amount of time playing with the emulator and it is far better to run through all of the E-Trac controls in the warm and dry than trying to remember what does what out in the field.

A nice feature of the emulator is that you can tweak a pattern, save it and then upload it to your E-Trac. Alternatively, you can build patterns on the emulator and then test them on the targets contained in the downloadable files :))

stevexxx
Posts: 146
Joined: Mon Feb 28, 2011 8:54 pm
Location: Aberystwyth

Re: Minelab E-Trac Emulator Download

Post by stevexxx » Tue Mar 15, 2011 9:26 pm

This emulator has been so helpful, I was erring away from getting the e-trac because I thought it was going to be too complicated but after several hours playing got the hang of the basics and ordered the real thing.
Minelab E-Trac
Minelabe Sovereign Elite, 13" Wot coil
Fisher 1266-X

User avatar
mrix
Founder
Posts: 8868
Joined: Tue Sep 16, 2008 11:59 am
Location: UK South Coast
Has thanked: 108 times
Been thanked: 467 times
Contact:

Re: Minelab E-Trac Emulator Download

Post by mrix » Sun May 01, 2011 5:39 pm

The E-Trac works fantastic on the beach, wet sand, salt mud not a problem B-)
You will need to read up and spend time mastering the machine mind :)
Best of luck
mrix

Hornchurch
Posts: 440
Joined: Sat May 28, 2011 5:54 pm
Location: Hornchurch, Essex

Re: Minelab E-Trac Emulator Download

Post by Hornchurch » Mon Jun 20, 2011 11:56 pm

Cant see any files for UK coinage etc, anyone know if theres a file?
Minelab E-trac & still learning

User avatar
Blackadder43
Moderator
Posts: 8687
Joined: Sun Feb 21, 2010 1:34 pm
Location: Somerset
Has thanked: 391 times
Been thanked: 350 times

Re: Minelab E-Trac Emulator Download

Post by Blackadder43 » Tue Jun 21, 2011 12:29 am

There is but ive never managed to get it to work...
Best thing is put your machine into "learn" mode..
Then get all the coins you think you want to find and wave them under the coil......the machine will open up the areas that the coins fall into.....giving you exact numbers and a good beach program if coins are the only thing you want to find.....
When you are right no one remembers; when you are wrong no one forgets

Hornchurch
Posts: 440
Joined: Sat May 28, 2011 5:54 pm
Location: Hornchurch, Essex

Re: Minelab E-Trac Emulator Download

Post by Hornchurch » Tue Jun 21, 2011 8:40 am

Thanks BA, i dont do beaches generally, just trying to get used to all the responses. My 1st trip out was good, but a little confusing at times
Minelab E-trac & still learning

User avatar
mrix
Founder
Posts: 8868
Joined: Tue Sep 16, 2008 11:59 am
Location: UK South Coast
Has thanked: 108 times
Been thanked: 467 times
Contact:

Re: Minelab E-Trac Emulator Download

Post by mrix » Tue Jun 21, 2011 9:05 am

I use the system BA explained on my local Bournemouth beach, this beach generally gets massively populated during the summer months so modern day coinage can be ripe, unfortunately so is rubbish :(
To counteract many hours of unnecessary digging, I make a pattern by blanking out the screen, set to auto except then pass all targets I wish to find in front of the search head, it really does work a treat :) you will still pick up some ring pulls and bottle caps as they are still classed as good signals but generally searching will be so much easier, really love this function of the e-trac :) B-)

Cheers
mrix

User avatar
Blackadder43
Moderator
Posts: 8687
Joined: Sun Feb 21, 2010 1:34 pm
Location: Somerset
Has thanked: 391 times
Been thanked: 350 times

Re: Minelab E-Trac Emulator Download

Post by Blackadder43 » Tue Jun 21, 2011 10:52 am

It might make it easier if you post up all the settings you have made and people can advise you...
It sounds as though you have "multi sounds/tones" on.....you may find it easier on the learning curve if you turn this to "4 tones"
On 4 tones dig the top 3 and ignore the iron grunt (providing you are in ferrous sounds, if in conductive sounds then ignore the high squeal and dig the lower 3 sounds)

Still worth experimenting by passing objects under the coil to get used to their sounds...
When you are right no one remembers; when you are wrong no one forgets

Hornchurch
Posts: 440
Joined: Sat May 28, 2011 5:54 pm
Location: Hornchurch, Essex

Re: Minelab E-Trac Emulator Download

Post by Hornchurch » Tue Jun 21, 2011 9:31 pm

Settings were as follows:
Threshold Pitch 16
Threshold Level 15
Vol Limit 30
Vol Gain 24
Response NORMAL
2 Tone
FERROUS
Variability 25
Limits 30
Recovery Deep ON (when i found my key)
Recovery Fast ON
Trash Density LOW
Ground DIFFICULT
Pinpoint Mode SIZING
Sensitivity AUTO +3 or +2

My good signals were nice & clear & iron grunted, but there were quite a few iffy signals inbetween that i didnt understand.
Not got a hang of what the numbers mean yet or Iron Mask

Well you did ask!! =))
Minelab E-trac & still learning

User avatar
Blackadder43
Moderator
Posts: 8687
Joined: Sun Feb 21, 2010 1:34 pm
Location: Somerset
Has thanked: 391 times
Been thanked: 350 times

Re: Minelab E-Trac Emulator Download

Post by Blackadder43 » Tue Jun 21, 2011 10:14 pm

Hiya mate, ok lets tackle things one at a time.
Volume gain: set this to 30
Recovery deep: turn this off
Read this thread to understand my thinking, the initial post is copy and pasted from Minelab.com engineer who wrote this to explain how "recovery deep" worked and when it should be used, the blog came about after a few of us emailed them the query.
http://www.metaldetectingforum.co.uk/vi ... =98&t=4123
Volume gain at max does more good and uses less process power than recovery deep on.

You say you had a few iffy signals that you didnt understand, i think the reason for this is using "2 tones"
Basicaly you have told your machine to put all targets into 2 areas.
The problem this creates is the "cut off " point at which the machine will go from "iron grunt" to "diggable signal" is quite high.
What i'm trying to say is you may have a target that isnt fully iron, or is so close to the "iron grunt" cut off that the machine isnt sure which area to put it in.
If you change this to "4 tones" then you may find the "iffy" signals will fall significantly.
Basicaly by using 4 tones you lower the "cut off" point for iron, and assign anything above this as a diggable signal.
So in 4 tones you still get and ignore the iron grunts, but you have 3 tones that are diggable signals.
If that makes sense.
I dont suggest using multi tones yet as they will do your head in until you get used to the numbers.

Try to keep auto sensitivity on +3 if you can.
Also make sure the sensitivity on that same screen is set to 30......its not a proven fact yet whether this has a bearing on the level the machine will set itself to, but it does no harm to have it set at its max.

If when on a field your auto sensitivity is hitting the high 20's, then try switching to manual and setting the senisitivity as close to the auto level as you can, it will increase the depth of the machine.
Using auto the machine filters the 3 channels and sets them the same, where as manual will allow the 3 channels to work more efficiently....
Only start using manual sensitivity when you are comfortable with the machine in auto, it does turn the Etrac into a different beast.

To start learning the numbers then collect as many things as you can that you are likely to find and set the machine up on a table outside, without the stems.
This way you can hold the coil and wave the object under it whilst still reading the numbers on the display....
Hope this helps....
When you are right no one remembers; when you are wrong no one forgets

Hornchurch
Posts: 440
Joined: Sat May 28, 2011 5:54 pm
Location: Hornchurch, Essex

Re: Minelab E-Trac Emulator Download

Post by Hornchurch » Tue Jun 21, 2011 10:33 pm

Thanks BA, thats very helpful, i am starting to understand things a little more now.
Are there any numbers that are just not worth digging, or should i always judge by the audio response?
Minelab E-trac & still learning

User avatar
Blackadder43
Moderator
Posts: 8687
Joined: Sun Feb 21, 2010 1:34 pm
Location: Somerset
Has thanked: 391 times
Been thanked: 350 times

Re: Minelab E-Trac Emulator Download

Post by Blackadder43 » Tue Jun 21, 2011 11:45 pm

Dont concern yourself too much with numbers just yet, they can be influenced way too much by whats in the ground, objects close by, mineralisation, etc etc....
If you switch to 4 tones then dig all tones above the iron grunt....
Iffy signals, try moving around the target by 360 degrees and listen to how the iffy signal changes, try diggin some to give you an idea what makes them...
When you are right no one remembers; when you are wrong no one forgets

billy fishpond
Posts: 412
Joined: Tue Aug 16, 2011 11:11 am
Location: lancashire

Re: Minelab E-Trac Emulator Download

Post by billy fishpond » Fri Aug 26, 2011 10:59 am

this is a great tool, its really helping me loads with my e-trac. i would't have a clue with out it. :) by the way the forum is great aswell :D
E-TRAC

stargazer
Posts: 2808
Joined: Thu Jul 08, 2010 4:21 am
Location: Rochdale
Has thanked: 8 times
Been thanked: 71 times

Re: Minelab E-Trac Emulator Download

Post by stargazer » Fri Aug 26, 2011 2:38 pm

Hobgoblin wrote:Cant see any files for UK coinage etc, anyone know if theres a file?
I've got a UK coins file , I think. But I'm blowed if I can enter the file into the programme !

It's not a big issue as I am sure I've outgrown it now anyway.
The mighty Minelab Etrac !

I'm UBIQUE! RE

norfe1984
Posts: 227
Joined: Thu Mar 29, 2012 12:19 am

Re: Minelab E-Trac - Emulator Download

Post by norfe1984 » Mon Sep 17, 2012 6:59 am

could some one link me to the uk coin file cant find it any where or 1 that will download most have be curupt files :(
T2

Tanglefoot
Posts: 349
Joined: Wed May 04, 2011 6:48 pm
Location: Gloucester

Re: Minelab E-Trac - Emulator Download

Post by Tanglefoot » Mon Sep 17, 2012 4:28 pm

Hi norfe, have pm'd you...cheers.

norfe1984
Posts: 227
Joined: Thu Mar 29, 2012 12:19 am

Re: Minelab E-Trac - Emulator Download

Post by norfe1984 » Mon Sep 17, 2012 8:31 pm

iv alredy go the download, i was after the uk coinage software mate
T2

Slow & Low
Posts: 1155
Joined: Sun Jul 10, 2011 1:55 pm
Location: North West

Re: Minelab E-Trac - Emulator Download

Post by Slow & Low » Mon Sep 17, 2012 9:19 pm

Hello Tanglefoot !

Anychance of the UK Coin programme file please, or a link to it.

Cheers

Steven.

norfe1984
Posts: 227
Joined: Thu Mar 29, 2012 12:19 am

Re: Minelab E-Trac - Emulator Download

Post by norfe1984 » Tue Sep 18, 2012 6:47 am

yes please me 2 ::g
T2

Iron Man
Posts: 25
Joined: Mon Feb 18, 2013 3:59 pm

Re: Minelab E-Trac - Emulator Download

Post by Iron Man » Tue Jun 11, 2013 12:13 pm

There's an English coins file available for the E-Trac emulator at:

http://m-h-group.org.uk/Reference.htm" onclick="window.open(this.href);return false;

If you want anything added to the coins file then PM me with the Fe-Co numbers and a description, whether coin, artefact or whatever.

Cheers

Pete
XP Deus V3.2
Minelab E-Trac
Garrett Ace 250

norfe1984
Posts: 227
Joined: Thu Mar 29, 2012 12:19 am

Re: Minelab E-Trac - Emulator Download

Post by norfe1984 » Tue Jun 11, 2013 7:43 pm

sold it now couldnt use the bleeding thing lol...now have t2 no looking back love it..no more listning to r2d2 on speed.... x;
T2

geoffswansea
Posts: 5
Joined: Fri Apr 20, 2012 9:12 pm

Re: Minelab E-Trac - Emulator Download

Post by geoffswansea » Wed Jul 10, 2013 8:43 pm

well to start off can I say what a fantastic idea the emulator is !! full marks for that ::g
can I now be very cheeky and suggest someone puts this up for a phone app?
I own a iphone and think this emulator would be of benefit to a lot of people
regards to all
Geoff
swansea

clint
Posts: 3722
Joined: Tue Jun 28, 2011 9:12 pm
Location: Wrexham
Been thanked: 9 times

Re: Minelab E-Trac - Emulator Download

Post by clint » Wed Jul 10, 2013 9:31 pm

Well my humble opinion as a new ET user...I never used the emulator before buying the machine,although I was advised to..BUT it is quite easy to navigate through the menus and find out where things are and make adjustments.The only thing I struggled on was downloading files/programmes to the Etrac exchange but soon had that sorted with help off the forum..it is easy..even for me!As for target numbers for coins etc...these may ring true in air tests but may not on actual targets esp. in iron or mineral infested ground.You really need to get the machine and use it..it gradually,with time and patience,becomes clear what to dig.I wish I had more time to get out as this machine really is good,I`ve winkled stuff out of areas I gave up on with the Euroace-although the Euro did serve me well as a starter machine and I still have it as back up.People always seem to go on about the vast amount of tones/noise...true it`s noisy-only if you want it to be..for eg. if you set it to multi tones and give the amount..say 20,you will get 20 different tones,all for different ferrous/conductive qualities of different metals..but you can set it for 2 or 4 tones if you like but it won`t be as effective as the machine is more descriminating/accurated with higher settings.Don`t let this put you off..your brain soon adjusts as "good" tones seem grouped together and stand out.As for swapping to conductive tones from ferrous..easy-peasy!!

regards

Clint
Etrac.13" Ultimate Coil.CP3 TT`s
8x6 sef
Euroace.
Deteknix Pointer,camo,oh yeah! ...does what it says on the box..
Garrett Propointer..ok...(now it's fixed!)
Jeff`s big tool!

hummyhoardhunter
Posts: 124
Joined: Sun Oct 20, 2013 10:37 pm
Location: Brighton

Re: Minelab E-Trac - Emulator Download

Post by hummyhoardhunter » Mon Oct 21, 2013 10:19 pm

mrix wrote:Hi all, Minelab have released a Emulater, its a bit like actually using a virtual online detector before you actually buy the machine to help get you used to the controls..
Its really good :) The Download link is below.
Minelab E-Trac Emulator

Cheers all
mrix
Hi, what a great link and idea using an emulator, been very helpfull, thankyou so much, feel alot more confident now.
Thanks again
HHH

User avatar
hihosilver
Posts: 2242
Joined: Thu Sep 08, 2011 10:50 pm
Location: Bristol
Has thanked: 12 times
Been thanked: 26 times
Contact:

Re: Minelab E-Trac - Emulator Download

Post by hihosilver » Tue Jul 28, 2015 10:09 am

Has anyone tried to download this emulator lately? It only seems to ever play one tone when 'scanning' over a target, which is a bit useless if you're trying to learn the tones, except during the 'startup' process and when in pinpoint mode, where it seems to play the range of tones.
I'm running Win 7 but have tried it as 'admin' and in compatibility modes for other OS's but nothing seems to be making any difference.
Current setup:
XP Deus v2.0, GARRETT Pro-Pointer
MD'ing since Sept '11

Looking for a friendly club in the Bristol and Somerset area? Contact us at:
www.wessexsearchers.club

User avatar
beaubrummell
Posts: 3723
Joined: Sat Mar 30, 2013 12:50 pm
Location: Essex
Has thanked: 3 times
Been thanked: 192 times

Re: Minelab E-Trac - Emulator Download

Post by beaubrummell » Tue Jul 28, 2015 10:23 am

I had to delete the program in the end because it somehow locked up my computer when I tried to use it. To be honest I think it was more a bit of fun than a valuable tool.
Minelab Explorer II
SEF 12 x 10 coil
Deteknix Wader Li Xpointer
Lesche Digging Tool
AMES entrenching tool
Souped-up Spear & Jackson mini spade
Chefphones CP2 Black
Tomcat Dakota boots

slowsweep
Posts: 2192
Joined: Fri Nov 23, 2012 6:36 am
Has thanked: 18 times
Been thanked: 65 times

Re: Minelab E-Trac - Emulator Download

Post by slowsweep » Tue Jul 28, 2015 1:13 pm

hihosilver wrote:Has anyone tried to download this emulator lately? It only seems to ever play one tone when 'scanning' over a target, which is a bit useless if you're trying to learn the tones, except during the 'startup' process and when in pinpoint mode, where it seems to play the range of tones.
I'm running Win 7 but have tried it as 'admin' and in compatibility modes for other OS's but nothing seems to be making any difference.
It replicates the positive target tones you should be listening for when you sweep over it but does not simulate ground mineralization so you dont get the sqeeks and squawks as you do in the field.
Just dig it and put your mind at rest

User avatar
hihosilver
Posts: 2242
Joined: Thu Sep 08, 2011 10:50 pm
Location: Bristol
Has thanked: 12 times
Been thanked: 26 times
Contact:

Re: Minelab E-Trac - Emulator Download

Post by hihosilver » Tue Jul 28, 2015 1:24 pm

Ok thanks folks. I'd incorrectly assumed it was a full emulator.
Current setup:
XP Deus v2.0, GARRETT Pro-Pointer
MD'ing since Sept '11

Looking for a friendly club in the Bristol and Somerset area? Contact us at:
www.wessexsearchers.club

Post Reply

Return to “Minelab E-TRAC Forum”