Etrac settings for stubble

Only for the discussion of the Minelab E-TRAC metal detecting within this forum.
Post Reply
Norvs
Posts: 63
Joined: Thu Jul 09, 2015 2:14 pm
Has thanked: 16 times
Been thanked: 9 times

Etrac settings for stubble

Post by Norvs » Fri Sep 16, 2016 5:43 pm

Hi all I have been detecting for a season on fields that have produced a full range fro m Roman through to late Georgian but as of now have only found two hammered. I have found lots of small Roman bronzes from good depth but not much medieval coinage. There was a Manor House built in the late 15 th century on the farm which is no longer there but for some reason I am not finding hammered coins which I am sure are there. I use the Etrac on multi conductive with a tadpole disc but I am not sur I have the rest of the setup correct, any advise please :ml



User avatar
venator
Posts: 34
Joined: Tue Jan 12, 2016 3:22 pm
Has thanked: 24 times
Been thanked: 5 times

Re: Etrac settings for stubble

Post by venator » Fri Sep 16, 2016 7:38 pm

Hi Norvs
In addition to your settings, I set the response to smooth and sensitivity in manual with the level as high as the ground mineral conditions allow without it becoming too chattery.

Post Reply

Return to “Minelab E-TRAC Forum”