No Sound ?

Frum group discussion of the Garrett Ace 300i Metal detector.
Post Reply
User avatar
Mr Hammered
Posts: 23
Joined: Fri Jul 26, 2024 3:25 pm
Has thanked: 31 times
Been thanked: 23 times

No Sound ?

Post by Mr Hammered »

Hi all
Went out detecting today with the Garret ace 300i
And started of OK but suddenly had no sound coming from the unit. Tried plugging in the headphone jack but no sound through them either.
All programs seem to be working as normal but no sound.
Any ideas would be much appreciated?
Thankyou all.
User avatar
Phil2401
Posts: 9180
Joined: Sun Dec 04, 2016 3:31 pm
Location: Surrey, originally Yorkshire
Has thanked: 5597 times
Been thanked: 4647 times

Post by Phil2401 »

Try a factory reset - hold the power button down for 10 - 20 seconds until you hear a fast double beep - might do the trick!

Phil
Quaerite et invenietis
User avatar
Mr Hammered
Posts: 23
Joined: Fri Jul 26, 2024 3:25 pm
Has thanked: 31 times
Been thanked: 23 times

Post by Mr Hammered »

Hi just tried that and still nothing, puzzled!
User avatar
ManOnTheMoon
Posts: 1186
Joined: Wed Sep 28, 2022 12:12 pm
Location: North Cotswolds
Has thanked: 327 times
Been thanked: 1183 times

Post by ManOnTheMoon »

My initial guess is that an audio signal is not reaching the detector speaker, or the headphone jack i.e. something in the audio generation system has failed.

How old is the detector? It appears the hands-on attention of an electronics boffin is required. A couple of the electronics wizards on this forum may be able to offer useful advice.

The Garrett website has information on their website regarding repairs in Europe, under the section of this page headed "International Warranty and Repair Service":

https://garrett.com/sport/warranty-registration

"For UK and EU customers - If your local Garrett retailer is unable to correct the problem with your detector, you may contact Garrett's International Service Center in Germany. "
"The person who can enjoy the ordinary miserable days, is a happy fella."
Bob Mortimer in 'Gone Hogmanay Fishing'
Macsen Wledig
Posts: 1095
Joined: Thu Feb 17, 2022 11:34 pm
Location: Lancashire
Has thanked: 2012 times
Been thanked: 1434 times

Post by Macsen Wledig »

The cables on those 300's tend to be fickle and need fixing securely to the shaft to avoid wriggle that can cause wires to fray.
Mine died while I was out in the field. I hadnt banged it or done anything particularly damaging it just died.
The autopsy showed the wiring at the coil had just worn away and would have needed skillful soldering to fix the issue.
Dave The Slave
Posts: 3618
Joined: Fri Sep 06, 2013 2:53 pm
Has thanked: 12472 times
Been thanked: 2845 times

Post by Dave The Slave »

Have had this a couple of times with the 400i, in the 8 years i`ve had it.
Quick check and the coil cable had become unscrewed from the control box.
Hopefully yours is similar.
Cheers, [81/]
Dave.
Bounty Hunter Tracker IV
Garrett 400 I
Wiltshire Rich
Posts: 37
Joined: Tue Apr 16, 2024 11:03 pm
Has thanked: 66 times
Been thanked: 51 times

Post by Wiltshire Rich »

Dave The Slave wrote: Sat Dec 28, 2024 3:39 pm Have had this a couple of times with the 400i, in the 8 years i`ve had it.
Quick check and the coil cable had become unscrewed from the control box.
Hopefully yours is similar.
Cheers, [81/]
Dave.
Similarly with my Euro Ace and 300i..... Hopefully what Dave has suggested is the easy fix!
Best wishes to all as ever...
Rich
"The greatest secrets are always hidden in the most unexpected places" - Roald Dahl

Garrett Apex (amongst other Garretts!) & Pro Pointer
User avatar
Mr Hammered
Posts: 23
Joined: Fri Jul 26, 2024 3:25 pm
Has thanked: 31 times
Been thanked: 23 times

Post by Mr Hammered »

Thanks guys
Just an update checked machine again yesterday and still no sound from control box but plugged in the headphones and I have sound through them.
I am guessing that there must be a problem to the speaker area.
Did use machine and did find a hammered. 😃
Wiltshire Rich
Posts: 37
Joined: Tue Apr 16, 2024 11:03 pm
Has thanked: 66 times
Been thanked: 51 times

Post by Wiltshire Rich »

Mr Hammered wrote: Mon Dec 30, 2024 7:43 pm Thanks guys
Just an update checked machine again yesterday and still no sound from control box but plugged in the headphones and I have sound through them.
I am guessing that there must be a problem to the speaker area.
Did use machine and did find a hammered. 😃
Mr Hammered found a hammered..... Sounds like the start of a nursery rhyme!! [88/] .... I would always use headphones anyway but maybe that's just me. At least it's not a catastrophic issue!

Best wishes to all, as ever....
Rich
"The greatest secrets are always hidden in the most unexpected places" - Roald Dahl

Garrett Apex (amongst other Garretts!) & Pro Pointer
Post Reply

Return to “Garrett ACE 300i Forum”

Who is online

Users browsing this forum: No registered users and 2 guests