- Posts: 6
- Joined: Sat Jan 26, 2019 7:48 pm
I've been using the Etrac for a few weeks and thought I would mention I have a 15" coil.. coiltek Wot coil 2 treasure seeker. Has anyone had experience with using this coil..will I Benifit from using it over the standard coil this early in using the Etrac.yes it's heavy but I do have a bungy line on my machine. Was thinking of getting a Detech 13" ultimate coil..but I have this haven't tried it yet.. I would be grateful of any help.
- Posts: 422
- Joined: Mon Feb 06, 2017 5:03 pm
- Location: North Cambs
- Has thanked: 245 times
- Been thanked: 250 times
The Ultimate is lightweight being only marginally heavier than the stock coil.
It is a good coil for covering a little more ground but I have not noticed any other advantage with it. I haven't noticed any greater depth achieved, however it finds small targets like cut halves and quarters and pinpoints as accurately as the stock coil does, once you get used to it.
I used a 15" coiltec on an Xterra 705 and couldn't get on with it. There seemed to be no benefit to the extra size and weight. That is only my opinion, and as you've got one try it out.
I am with Wigeon on the Ultimate coil. It is very manageable on the E-trac, but as he says the main benefit is covering extra ground. You might like to consider going smaller rather than larger. the Nel Sharpshooter coil is a very useful addition on restricted sites.
Good luck with the E-trac.