Increasing depth ?

Forum group discussion of the Garrett Ace 200i Metal detector.
Post Reply
TheDonut
Posts: 229
Joined: Sun Apr 11, 2021 2:23 pm
Has thanked: 350 times
Been thanked: 190 times

Increasing depth ?

Post by TheDonut »

Hi all , just wondered if it is possible to increase depth on 200i ( not that I'm unhappy with my machine)?
How is more depth gained in general?
I've seen different coils being used on different machines , but don't really understand the ins and outs of it at the moments.

Cheers

Donut πŸ™‚πŸ‘
Garrett 200i
Nel Tornado Coil
GP pointer
Hombase mini spade
User avatar
haggz
Posts: 1680
Joined: Wed Jul 10, 2019 6:23 pm
Location: Watton at stone hertfordshire
Has thanked: 1413 times
Been thanked: 1322 times

Post by haggz »

I used an Ace 250 and assume not too much different than the 200 when my quest began and soon upgraded the coil to the nel tornado. Gained maybe a couple of inches in depth but could cover an area quicker. On the standard coil i found i needed to swing slower to get deeper signals. Not much help but im sure a more knowledgeable detectorist will be along soon
equinox 800
makro pinpointer
freds field 1 programme
Barbossa76
Posts: 560
Joined: Sat Jun 02, 2018 3:32 pm
Has thanked: 542 times
Been thanked: 310 times

Post by Barbossa76 »

I found the same results on my ace 300i I think it was more stable as well
Minelab vanquish 340 & makro racer 2 and a shovel
TheDonut
Posts: 229
Joined: Sun Apr 11, 2021 2:23 pm
Has thanked: 350 times
Been thanked: 190 times

Post by TheDonut »

Thanks guys , so I it most coils are interchangeable?

Donut πŸ™‚πŸ‘
Garrett 200i
Nel Tornado Coil
GP pointer
Hombase mini spade
Barbossa76
Posts: 560
Joined: Sat Jun 02, 2018 3:32 pm
Has thanked: 542 times
Been thanked: 310 times

Post by Barbossa76 »

There's loads of coil options for that model of detector [81/]
Minelab vanquish 340 & makro racer 2 and a shovel
Koala
Posts: 7894
Joined: Thu Sep 12, 2013 2:47 pm
Location: Cheshire
Has thanked: 1287 times
Been thanked: 3838 times

Post by Koala »

there so many variables

target size ?

ground conditions ?

Quality of factory coil ?

I find little or no difference in coin depth in the ground depth between 5.5", 8" or 10"coils "any machine)

above 10" there is a small increase in depth on pre decimal half penny and large. In the fields near me any you only get 1/3rd of the increase you see in air testing. In your field you mileage may be different.

Main thing is not to get fixated on depth. Changing coil or machine make only a little difference when compared to moving to a more productive field.

swinging properly
machine running properly and not messed up in some custom settings
all will make more of a difference. Even the you have to walk over it.

As a couple of examples

on really bad ground like wet sand increasing your coil size normally decreases your finds rate
and a really hot but chattering coil will normally find less than a more stable coil

the First time you walk down a field here in Cheshire you realise that depth isnt the main limiting factors.
TheDonut
Posts: 229
Joined: Sun Apr 11, 2021 2:23 pm
Has thanked: 350 times
Been thanked: 190 times

Post by TheDonut »

Thanks Koala , much food for thought there.
Interestingly I believe the much slower swing I did on the weekend helped me find the 3 coins .
I can only manage about 3 hrs tops before running out of steam. With this in mind , I think from now on I'll pick a small area of a field , swing slower from now on.
Just as a noob one is itching find everything in one day .

Hopefully in a couple of weeks I should have a new 30 acre field , coupled with what I currently have that should keep me occupied for the foreseeable.

Donut πŸ™‚πŸ‘
Garrett 200i
Nel Tornado Coil
GP pointer
Hombase mini spade
TheDonut
Posts: 229
Joined: Sun Apr 11, 2021 2:23 pm
Has thanked: 350 times
Been thanked: 190 times

Post by TheDonut »

As u said , you have to walk over it.
I went out on Saturday , found my crusty coins , Sunday an old who detects same field found an old gold ring 😭🀷😁
Gone to flo apparently.

Donut πŸ™‚πŸ‘
Garrett 200i
Nel Tornado Coil
GP pointer
Hombase mini spade
Post Reply

Return to β€œGarrett ACE 200i Forum”

Who is online

Users browsing this forum: No registered users and 56 guests