Metal Detecting

Hello all! & hope you are all well and managing to get out in the nice weather

Been out on previously ploughed pasture for a few hours this afternoon, amongst the usual scrap had a nice Guild of courtesy children’s national pendant, what looked like a very small circular lead bag seal but had patent 619.03 stamped on one side, a hammered coin and a couple of strange ones for hopeful ID please.

The hammered was 6 inch deep, gave a dodgy 25-27 a solid 23 out of the hole, with a positive and negative grunts from all angles with my manticore, so I was surprised to see a hammered come up, just show’s amongst negative grunts if there is a positive signal amongst them from all angles still dig the target.

Any help with ID’s as always would be much appreciated..

Medieval strap fitting
https://finds.org.uk/database/artefacts ... /id/440209

Medieval strap loop.

10cf3 with blundered reverse legend.

Allectus wrote: Sat Apr 12, 2025 8:50 pm Medieval strap loop.

Thanks again Tony, what is the hammered please? It was found in the same area as my first ever coin found that you ID’d for me as a very worn copper Charles turner

You answered thanks as I reposted & have no idea why photos of my lurcher were uploaded

Flamsteed wrote: Sat Apr 12, 2025 8:50 pm Medieval strap fitting
https://finds.org.uk/database/artefacts ... /id/440209

Thanks a lot for that brilliant ID Flamsteed

Allectus wrote: Sat Apr 12, 2025 8:53 pm 10cf3 with blundered reverse legend.

As you know I’ve always appreciated your help with all ID’s since the first coin I found, a toasted Charles I small copper over 3 years ago now

Just curious which is your preference with me messing about with a brilliant keepsake find to me but not valuable with your description being blundered?

Cheers again, RG