Page 1 of 2
Minelab Pro-find
Posted: Mon Mar 12, 2012 5:50 pm
by Billythefish
Anyone heard anything about the new pin pointer from Minelab? I think it's supposed to be out in April.
Hopefully it'll challenge the Garrett!
Re: Minelab Pro-find
Posted: Mon Mar 12, 2012 6:48 pm
by historyhunter
This is the one....looks good, hope its just as good if not better than the garrett because the garrett has its feet firmly on the ground with this one.
Re: Minelab Pro-find
Posted: Mon Mar 12, 2012 6:50 pm
by biro
Combien
Re: Minelab Pro-find
Posted: Mon Mar 12, 2012 6:52 pm
by Allectus
Adjustable sensitivity.....Sounds promising!
A
Re: Minelab Pro-find
Posted: Mon Mar 12, 2012 6:53 pm
by historyhunter
biro wrote:Combien
Dont know?...im going to guess a bit more than the garrett....
does anyone know????
Re: Minelab Pro-find
Posted: Mon Mar 12, 2012 6:57 pm
by fishy
Dont have a pointer yet.
Im holding out for this
Re: Minelab Pro-find
Posted: Mon Mar 12, 2012 7:10 pm
by FunkyGibbon
Do you really want to be messing around with adjustable sensitivity on a pointer? Not sure I would.
Re: Minelab Pro-find
Posted: Mon Mar 12, 2012 7:16 pm
by Trainer
I would agree Whats the point of that ?
Re: Minelab Pro-find
Posted: Mon Mar 12, 2012 7:20 pm
by Rincewind
A probe that was twinned with your detector and adjusted its discrimination control to match cant be far away.
Re: Minelab Pro-find
Posted: Mon Mar 12, 2012 7:26 pm
by cockneyred1970
looks good has to go some though to outdo the pro pointer
Re: Minelab Pro-find
Posted: Mon Mar 12, 2012 7:30 pm
by Billythefish
Fingers crossed it won't be too expensive, as I too am holding out for this one!
Re: Minelab Pro-find
Posted: Mon Mar 12, 2012 8:49 pm
by Excalman
Seems to have audio and vibrate or vibrate only option. Hope this is as good as it sounds!!! I much prefer a vibrating probe for use on the beach..
Paul...
Re: Minelab Pro-find
Posted: Mon Mar 12, 2012 8:52 pm
by Bridex
Rincewind wrote:A probe that was twinned with your detector and adjusted its discrimination control to match cant be far away.
Already available, at least for the Minelab ETrac, Explorer etc. connects between control unit and coil with a 'changeover' switch to select either probe or coil. Same discrim on the probe and coil, and same target ID info - draws power from the MD battery at the same rate as the coil in use.
http://www.sunraydetector.com/sun_ray_x-1_page.htm" onclick="window.open(this.href);return false;
Re: Minelab Pro-find
Posted: Mon Mar 12, 2012 8:57 pm
by julesofkernow
Am I being dumb here
Why would you need sensitivity adjustment?? And I reckon its gonna cost a fortune.. Jules (having a moan
)
Re: Minelab Pro-find
Posted: Mon Mar 12, 2012 9:29 pm
by sparky1279
