After watching Mrix's video on the new WS5 headpones for the Deus, I ordered a set from Mick at Leisure promotions, The selling price was £290, and because I quoted my club membership, they gave me an extra £15 off.
This was a good deal I think, but when I opened the box, there was no charging cable or instructions to marry it up with my deus, has anyone bought these headphones? and what came in the box?
Ok, ive not got my deus out the car and tried linking them up yet, but can someone remind me how you do it please?
Ray
XP WS5 headphones
- mrix
- Founder
- Posts: 15619
- Joined: Tue Sep 16, 2008 11:59 am
- Location: UK South Coast
- Has thanked: 2274 times
- Been thanked: 2516 times
- Contact:
Hi Ray, there are no instructions as the setup is the same as the WS4`s
You will need to use the single usb lead and make sure the headphones have been updated to V3.1
i went through the update process over again with everything I had
The update procedure if you have forgotten is below for pairing the headphones...
you just need to pair them again by putting in the coils serial number/s
Its a little unclear / confusing because it only allows you see 2 digits at a time.
Hope this helps.
Procedure if you have forgotten
1) Press menu until you reach COIL
2) Choose the flashing free slot with - and + for example 02
(01 is already assigned to the original coil).
3) Press + for 5 seconds to switch to serial number entry mode.
4) With - AND + enter the first digit of the serial number then
validate it with menu button
Continue in this way until you reach the sixth digit.
The new coil is now operational in this slot and should become active.
Cheers
mrix
You will need to use the single usb lead and make sure the headphones have been updated to V3.1
i went through the update process over again with everything I had

The update procedure if you have forgotten is below for pairing the headphones...
you just need to pair them again by putting in the coils serial number/s

Its a little unclear / confusing because it only allows you see 2 digits at a time.
Hope this helps.
Procedure if you have forgotten
1) Press menu until you reach COIL
2) Choose the flashing free slot with - and + for example 02
(01 is already assigned to the original coil).
3) Press + for 5 seconds to switch to serial number entry mode.
4) With - AND + enter the first digit of the serial number then
validate it with menu button
Continue in this way until you reach the sixth digit.
The new coil is now operational in this slot and should become active.
Cheers
mrix
-
- Posts: 972
- Joined: Sun Feb 06, 2011 1:22 pm
- Location: Reading Berkshire
- Has thanked: 4 times
- Been thanked: 6 times
Many thanks Michael, I will get it done when i get home. Hve a good day fella.
XP Deus 9, new11 and 13 inch coils with WS4 and WS5 headphones
Chairman and founder of Berkshire Metal Detectorists Club
Chairman and founder of Berkshire Metal Detectorists Club
- mrix
- Founder
- Posts: 15619
- Joined: Tue Sep 16, 2008 11:59 am
- Location: UK South Coast
- Has thanked: 2274 times
- Been thanked: 2516 times
- Contact:
Who is online
Users browsing this forum: No registered users and 23 guests