explorer se new settings. WOW.

[lord lovell]

I use threshold 9 deep on sens at 32 descrim nails only iron mask 32

can anyone give me any advice as to the set up I use above do I need to adjust and setting am I missing anything?

[neeilix]

Thank you for the replies jcm & sj.
I'll give it a try now I know how to set it up. I think I'd better stick with conductive first as that's what I'm used to but I'll program in the ferrous too so I can give it a try later.
Thanks again.

[SMELLYJELLY]

Ok cool. Let us know how you get on.

[neeilix]

Thanks again for the info, I've had a little success running with no discrim and have just posted some pics in the Identification of Finds section here:-
(http://www.metaldetectingforum.co.uk/vi ... 20&t=80245)

I did try both but preferred the Conductive tones over the Ferrous. That's what I've been used to for over 2 years so is a hard habit to break but in Ferrous I'm sure it would be just as easy to pick out the goodies once you were used to it.
It did get a bit noisy in places where there was contamination but I stuck with it and will carry on with the clear screen, thank you!

[jcmaloney]

Great work & great finds.
Lots of people think Minelabs "don`t work" amongst iron but they do if there isn`t any discrim. Just listen for the "bumphs" amongst the iron.

[neeilix]

Nice one jcm. I've enjoyed trying a new setup with the SE Pro. I do have gathered a few machines now and while this machine may not be the quickest I do trust it will do me well. I have found many hammies with it with the discrim and hope to find many more without!
Thanks again and happy hunting!

[michaelrynne14]

Where are all these "fast off" "deep" etc settings? Are they in manual settings? Im struggling but only had mine a few says, i would like to use smartfind but need an idiots guide. Do you just go into menu and sort it ll out from there?

[beaubrummell]

Assume you don't have the manual.


https://www.minelab.com/__files/f/10415 ... ebsite.pdf" onclick="window.open(this.href);return false;

[allmetal]

Just push the detect button until it cycles round to the smart screen.

Press menu then options then response for fast and deep settings.

To select manual or auto setting push the middle arrow to left of screen to turn it on or off it is on when line is circling the sens number.

[michaelrynne14]

Thanks guys, can anyone post a screen shot of how they set up smart find i.e whats blanked out etc. Im slowly getting used to it but i use the normal screen with numbers at the moment. About to post a couple of finds form sunday for ident, hammered gave a very 'iffy' signal and what looks ike a noble coin weight came up like a solid silver. Am i doing this right??

[lord lovell]

Thanks guys, can anyone post a screen shot of how they set up smart find i.e whats blanked out etc. Im slowly getting used to it but i use the normal screen with numbers at the moment. About to post a couple of finds form sunday for ident, hammered gave a very 'iffy' signal and what looks ike a noble coin weight came up like a solid silver. Am i doing this right??

With the explorer dig every signal never go by the numbers set your machine at 22 sens 9 threshold deep desrim nails only iron mask 23 and it will find

[michaelrynne14]

Thanks so much thats all i wanted to know I am going out sunday so will do just that.

[michaelrynne14]

Also LordLovell what sounds do you find are best? Ferrous or cond??

[andyhall74]

hi new to this forum and new to to the minelab se when you lads are saying cross out nails do you tick the coins, jewerly, foil, pulltab cheers

[allmetal]

Hi Andy What I do is just have an X on nails and clear all the other ones.