I was surprised to see a coin as the other silver coins i have dug with the deus have come in at a lower number, is this normal with this coin and the Deus, or have i just got my numbers mixed up.
HH

94 for a Silver Coin, is this Normal?
94 for a Silver Coin, is this Normal?Hi, today i got a Viccy silver One Shilling 1875, but it came in at 94.
I was surprised to see a coin as the other silver coins i have dug with the deus have come in at a lower number, is this normal with this coin and the Deus, or have i just got my numbers mixed up. HH ![]() Graduated from the XP ADX 250 then the GMP and now on the Deus
Now paired with the Equinox 800
That is strange... Normally large copper/bronze coins come up around 90's and silvers come in 40's - 60's (?)
Sam ![]() XP Deus II
MI-6 Chefphones CP6 And a ruddy good Spade ![]() If a robber ever breaks into my house looking for cash, i'll just laugh and look with him Big thick chunky silvers come up at 94/95 on setting 2 on mine buddy, a 2 schilling Viccy and Charles 11 sixpence both came in that high for me buddy
Deus XP, Garret Pin Pointer, Knee Pads n a whole lot of enthusiasm...
The main point is, it was a good enough signal and you dug it. Don't pay too much attention
to VDU numbers and rely more on the tones. I've been reading up a lot on the Deus recently as I just recently got one and apparently the Deus was origonally designed as a tone only machine with the controler on a magnet so that you can adjust your settings then stick it in your pocket. ![]()
Yep, that's exactly what I do, I hardly look at the control, only if the signal was iffy ![]() Equinox 800
Stainless steel Black Ada Big foot Garrett Pro-pointer AT Evolution Type R Pro Deteknix Stainless Steel Diamond Digger Kentish man detecting in the depths of rural France My first silver denarius came up at 82, yesterday's denarius was 70. Had quite a few roman bronzes come in at 98 and then change when I have dug em out. Don't tend to look at the screen much anymore, only to change settings...... Trust your ears.......
![]() ʎɐqǝ uo pɹɐoqʎǝʞ ɐ ʎnq ı ǝɯıʇ ʇsɐן ǝɥʇ sı sıɥʇ
Yes i do use my ears, but i do find myself looking at the screen, but i do not rely on it, as coming from a GMP i am more alert to tone changes
![]() Graduated from the XP ADX 250 then the GMP and now on the Deus
Now paired with the Equinox 800
i think a lot depends on the ground conditions and as it is so wet the signals are all over the place, when i got my first Roman coin with the Deus back in the summer it came out at 84, now it is so wet most seem to ring around 76 and some as low as 54 . Just listen to what the machine is saying to you
![]() What we do in life echoes in eternity
Thanks for the replies, and going by tones and sharp signals has to be the way to hunt, and not relying on the numbers to dig or not.
this is the way I used to dig before I got a screen, so I am just going to use the screen for adjusting settings and reference. I detect on 2 farms only a few miles apart, and the same sort of coins give different numbers, but are digable signals, so it must be soil and moisture conditions. thank you all for the advice HH Graduated from the XP ADX 250 then the GMP and now on the Deus
Now paired with the Equinox 800
yeah RM's spot on again,
![]() ![]() Whites Surfmaster PI Pro.
Makro Racer. Minelab Excalibur. yep thats normal ,tried a silver half crown ,came in at 94 as did a silver spur .silver ingot got 99
' hammys how i love ya, how i love ya my dear old hammys '
Back in Victorian times several die number experiments were performed. Presumably, most were used to determine the lifetime of specific dies.
The most well known was that on the silver coinage of 1864-1879, namely the sixpence, shilling and florin. (Brit Tips) Your shilling will have a die number above the date. I think they tried to make each die number using a different process to see which one lasted the longest. These are the die numbers for the 1875 shilling ; (1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,27,28,29,30,32,33,34,35,36,38,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,64,65,67,68,69,70,71,72,74,84,87) I wonder if it is possible that the different processes would cause different number displays on your detector? Or am I barking mad ![]() Garrett Ace 150 with 9x12 Coil, Garrett Propointer
Finds 2013 Decimal £9.56 George IV Death Medalion Jetton Antoninianus Of Quintillus 270 AD 1891 Half Sovereign Silver 3d Georgian Fob Seal (intaglio missing)
Hi, if it helps, the die number above the date is 12
Graduated from the XP ADX 250 then the GMP and now on the Deus
Now paired with the Equinox 800 Just found this on the interweb and thought I would pinch it and post it here
![]() VDU numbers for the Deus, personally I don't tend to trust the numbers greatly but I know some do.... Stater (Commius) 11.8 kHz 73 17.7 kHz 80 Henry VI Quarter Noble 11.8 kHz 62 17.7 kHz 71 George III Sovereign 11.8 kHz 74 17.7 kHz 80 Edward III Half Noble 11.8 kHz 71 17.7 kHz 77 Valentinian II Solidus 11.8 kHz 80 17.7 kHz 85 Stater (Chute type) 11.8 kHz 76 17.7 kHz 82 The standard and large coils both produce exactly the same readings for either frequency. With the range covering numbers from 62 to 85 and, bearing in mind that any of these can be "in soil" at different depths, lying at different angles and with the proximity of other targets, it's clear that one should not rely on target ID if looking for specific items. Thanks to someone called Dave..... ![]() ![]() ![]() ʎɐqǝ uo pɹɐoqʎǝʞ ɐ ʎnq ı ǝɯıʇ ʇsɐן ǝɥʇ sı sıɥʇ
![]() ![]() Who is onlineUsers browsing this forum: No registered users and 12 guests |