Silencer at the Deus

[Henrikras]

Hi Guys...
This what the manuel says. :
Scroll with and select REACTIVITY
Press EXPERT
Adjust the Silencer with
Press x2 to return to the main menu.
A few large iron objects or unusual shapes are often more difficult to discriminate. Often iron objects generate a few audible remnants of broken, or inconsistent signals (crackling). When you increase the silencer you are applying a filter which eliminates the crackling caused by ferrous. Level 2 represents a good compromise, but if you have difficulty to distinguish bottle caps, use level 4.
The Reactivity menu takes precedence over the silencer, so if you change the reactivity value this automatically imposes an appropriate silencer value. This is designed to avoid the silencer being set to a value that could reduce the effectiveness of the reactivity setting.

CAN ANYONE TELL ME WHAT THE NEGATIVE WOULD BE, IF I ADJUST AND USE TO HIGH SILENCER ?
Tryed Once ( GMP ) and feelt that the ID came more stabile.. But couldn't feel or see anything else. !
Same depth, same sharpeness, same tones...
Thanks
HR.

[Arrow]

I think running a higher Silencer makes the detector more noisier?
I use a Reactivity of 1 or 2, depending on the amount of Iron contamination?
I find a Silencer setting of 3 gives a clearer audio signal, on those very deep good targets, right a the edge of detection depth. I only hunt in All Metal, so i'm used to a bit of noise.
I just ignore in my head all the low and cracked tones, and just listen for high tones. Especially the faint sounding and short responses. I've pulled out Hammered coins from 10 to 12" on my pasture. But they are very weak sounding signals, as you'd expect.

Scott