Bungee

[oldartefact]

Although no great finds to report yet ... I am getting used to the beast... however I've noted that the control box is becoming ever so slightly slack in its mounting. i'm slightly worried that it may fall off and was wondering where I can but a sitable bungee cord and then how would i fix this to the stem?

[Danzigman]

Mobil phone supplier - have a look here - http://www.metaldetectingforum.co.uk/vi ... ilit=+line" onclick="window.open(this.href);return false;

[Danzigman]

[oldartefact]

Thanks John ... I'll check out to see if there is a hole thing ... back in 5!!
You are a real whizz with the camera!!

[oldartefact]

Hi John ... yes its the same as yours so will be visiting the local pet shop and hardwear store!!
HH john

[punka$$]

At the top of the deus page on this forum
http://www.metaldetectingforum.co.uk/vi ... 39&t=52167" onclick="window.open(this.href);return false;.

[oldartefact]

Thanks everyone ... All this has got me thinking is there a simple solution that involves 18 inches of 20lb fishing line and a couple of slip knots?

[Danzigman]

Thanks everyone ... All this has got me thinking is there a simple solution that involves 18 inches of 20lb fishing line and a couple of slip knots?

Yes one.. but it will take you for ever to untie them
Could be combined with these as an easy and cheap fix - http://img2.tradeee.com/photo/11237025/ ... Swivel.jpg" onclick="window.open(this.href);return false;

[oldartefact]

Thanks John... what i am thinking is this
Secure one end of the fishing line permanently to the control box using a half blood knot
at the other end create a loop which is big enough to allow the control box to pass through...
When putting control box through the loop do it so that the whole affair is wrapped round the stem..
Hope that makes sense .. I'll try it tomorrow and post the pics ,,, if it works that is!!