10 inch polo coil

[yorkie]

hi just a quick question would i be able to use the old 10 inch polo coil on my laser hawkeye TIA

[sweepstick47]

Apart from any technical difference that may exist, check the coil plugs are compatible with your machine as there both 4 and 5 pin versions in use. Regards ss47

[yorkie]

hi its the 5
pin coil

[bob79]

hi its the 5
pin coil

The coil is 5 pin?
Quick look on Pentechnic's, Hawkeye is 5 pin.

Bob

[yorkie]

thanks bob but would it just go straight on to the hawkeye without having to have it tuned in TIA

[bob79]

thanks bob but would it just go straight on to the hawkeye without having to have it tuned in TIA

Polo coil is I believe is concentric, any idea if the coil on the Hawkeye is DD or concentric, if DD would probably need tuning, Pentechnic's would have the answers.

Bob

[yorkie]

ok thank you bob

[Koala]

Tesoro legacy machines used two types of coil

so you can't plug the wrong one in they have different connectors


makes no difference if its concentric or DD

Machines with a ground balance will give good performance on any coil fitted that have the correct connector

machines without a ground balance will work but might not be optimal. However the odds are it will work fine without any internal adjustment.

[Koala]

slightly of topic but if you see the 5.75" concentric at a Good price I pick it up.

The one I had was stunning.

[yorkie]

ok thank you koala for the replies ive tried it with the 7 inch coil and seems to be ok

[Moruglah]

slightly of topic but if you see the 5.75" concentric at a Good price I pick it up.

The one I had was stunning.

My old tejon was brilliant With the 5.75 on