Bluetooth headphones

[Longcrosslau1]

Hi I’m looking for a good Bluetooth transmitter any information would be grateful

[Charliechap]

Many people swear by the Garrett z link .

Think that’s where I would be going if I needed to go wireless

Don’t think they are cheap mind

[Longcrosslau1]

Hi I have a whites dfx trying to go wireless my mate gave my Equinox 800 headphones any ideas on how to get into work thanks

[haggz]

Not sure if the module works with other brands of detector but some info

Pairing the WM 08

Pairing the WM 08 is only required at first time use, or when the WM 08 has been paired to a different detector. EQUINOX will automatically connect to the paired WM 08 for all future uses.

Press the WM 08 Power button for 2 seconds. The connection LED will slowly flash blue.
Press the Pairing button on the WM 08 until the blue LED starts flashing rapidly.
Press the Wireless button on the side of the EQUINOX control panel for 2 seconds until the LCD wireless icon starts to flash rapidly.

For first-time use of the EQUINOX, or following a factory reset, a short press of the Wireless button will immediately start the pairing sequence.

The blue LED on the WM 08, and the Wireless and Headphones icons on the EQUINOX LCD will stop flashing and remain on when the WM 08 has successfully paired.

If pairing is not successful within 15 seconds of initiating the pairing sequence, return to step 1.

Unpairing a WM 08

WM 08 audio modules can only be unpaired by pairing them to another EQUINOX detector.

Pairing Additional WM 08 Modules

Up to 4 WM 08 audio modules can be in use simultaneously. This is a useful feature for group training sessions. To pair additional WM 08 audio modules, repeat the standard WM 08 pairing procedure.

WM 08 Connectivity Icons

These icons appear on the top right of the EQUINOX LCD and show the WM 08 connectivity status. The number of connected WM 08 modules is indicated below the Wireless icon: