Set up for LOBO SuperTRAQ

[Daz2511]

Hi All,
Could someone help with my set up please, I’m sure I am doing it right as I am finding things but what could i be missing?

I turn the detector on in all metals check the ground to make sure there is nothing there then put the coil on the ground and turn down the threshold till I can just here the tone. Then pump the detector up and down about 6 inch for a few times. Then turn the detector to disc and off I go. After my set up I don’t touch the threshold at all.

For the settings I have the soil to normal, sensitivity at 9 and the disc level at 2.

Am i doing it right?

Cheers for any help
Daz