First time out with the Deus Lite and I got a really crisp signal using Basic 1 on pasture.
I dug a hole about 4 inches deep and the signal is right in the center of the hole reading 85 but it did not register on the pinpoint probe so I kept digging.
In the end I got down to about 14 inches - signal still 85 in the center of the hole and still nothing on the probe?
It took me about half an hour through stones etc - really tiring.
I am going back to the same permission next week, my question is would you give the hole another go or forget about it? If it is not registering on the probe how deep is it and what could it be?
Your thoughts would be appreciated.
No shouting please - I am a newbie

H