Pebble beach tips for noob
Forum rules
Please note: This forum is intended for accounts of your day's detecting and finds, etc. If you require an identification of your finds, please use our Finds Identification facility. Any replies here offering a ID will be removed.
Please note: This forum is intended for accounts of your day's detecting and finds, etc. If you require an identification of your finds, please use our Finds Identification facility. Any replies here offering a ID will be removed.
Pebble beach tips for noob
Hi folks!
I've just started treasure hunting on my local pebble beach and finding it tricky to locate stuff after getting a hit on the metal detector. Started off with a mini spade which was a mistake. Changed to a trowel and hands which is better. Guessing a pinpointer would make things easier?
Any tips on pebble beach detecting would be great. Pebbles ranging from 1cm to 5cm (ish).
Thanks in advance!
I've just started treasure hunting on my local pebble beach and finding it tricky to locate stuff after getting a hit on the metal detector. Started off with a mini spade which was a mistake. Changed to a trowel and hands which is better. Guessing a pinpointer would make things easier?
Any tips on pebble beach detecting would be great. Pebbles ranging from 1cm to 5cm (ish).
Thanks in advance!
-
- Posts: 495
- Joined: Thu May 19, 2011 11:06 am
- Location: Essex
- Has thanked: 136 times
- Been thanked: 313 times
I have various digging tools but prefer my mini spade on the beach , pebbles or sand , you are right in saying pinpointer, it’ll make a huge difference , not particularly enjoyable on pebbles chasing a small blob of aluminium around the hole is it 
Nokta Makro Legend 
-
- Posts: 7919
- Joined: Thu Sep 12, 2013 2:47 pm
- Location: Cheshire
- Has thanked: 1294 times
- Been thanked: 3863 times
one of the few situations where a pin-pointer is a must
depending on size lower down a plastic tray can help. Scoop a load onto the tray. rescan, Once its on the tray its becomes easy
move as little as possible otherwise it will keep dropping down. Also shift the bigger pebbles out of the way as the will push the target out of the search area.
depending on size lower down a plastic tray can help. Scoop a load onto the tray. rescan, Once its on the tray its becomes easy
move as little as possible otherwise it will keep dropping down. Also shift the bigger pebbles out of the way as the will push the target out of the search area.
-
- Posts: 816
- Joined: Tue Jul 31, 2018 9:16 am
- Location: Tyneside
- Has thanked: 695 times
- Been thanked: 825 times
Pinpointer definitely. I think it was Felixstow180 or Addicted to bleeps on YouTube who had a video for a technique. Sorry, I cant find a link but sub and watch their vids anyway as the are great channels with loads of tips.
Basically sweep the pebbles to each side of target with your foot, scan again and if not in piles on either side dig out one scoop deep from left to right from the flattened area and place the spoil in individual piles in front of the flattened area, scan again and repeat. As you are spreading out the spoil over a wider area it stops it falling back in the hole.
The alternative is a big sand scoop and go in hard and fast. In all cases the pointer is your friend, set on low sensitivity so when it goes off you are close to target. What doesn't help is when the detector picks up foil that the pointer can't, spent 10 mins recently chasing a tiny bit of canslaw!
Hope this helps, Dava.
Basically sweep the pebbles to each side of target with your foot, scan again and if not in piles on either side dig out one scoop deep from left to right from the flattened area and place the spoil in individual piles in front of the flattened area, scan again and repeat. As you are spreading out the spoil over a wider area it stops it falling back in the hole.
The alternative is a big sand scoop and go in hard and fast. In all cases the pointer is your friend, set on low sensitivity so when it goes off you are close to target. What doesn't help is when the detector picks up foil that the pointer can't, spent 10 mins recently chasing a tiny bit of canslaw!
Hope this helps, Dava.
Cscope CS4PI
Garrett Ace 300i
Minelab Equinox 800
Garrett Ace 300i
Minelab Equinox 800
Thanks for the tips guys. Looks like I'm getting a pinpointer then! Spent 15 mins the other day trying to locate a target.
Any recommendations on a pinpointer? Don't want to spend loads but I'm guessing the budget ones aren't very good?
Any recommendations on a pinpointer? Don't want to spend loads but I'm guessing the budget ones aren't very good?
-
- Posts: 816
- Joined: Tue Jul 31, 2018 9:16 am
- Location: Tyneside
- Has thanked: 695 times
- Been thanked: 825 times
Check out the accessories section on the left, tons of advice there.
Cheers, Dava.
Cheers, Dava.
Cscope CS4PI
Garrett Ace 300i
Minelab Equinox 800
Garrett Ace 300i
Minelab Equinox 800
-
- Posts: 7919
- Joined: Thu Sep 12, 2013 2:47 pm
- Location: Cheshire
- Has thanked: 1294 times
- Been thanked: 3863 times
still using my GP one.
need to be the static motion version from a reliably seller
need to be the static motion version from a reliably seller
-
- Posts: 7919
- Joined: Thu Sep 12, 2013 2:47 pm
- Location: Cheshire
- Has thanked: 1294 times
- Been thanked: 3863 times
I find a very pointy spade helps.
although hand size need to be moved by err hand first
although hand size need to be moved by err hand first
Who is online
Users browsing this forum: No registered users and 108 guests