Frequency issue on remote...

[What What]

Hi...

Probably me being thick but I'm exploring the remote atm and tried putting a new program on it... everything is fine apart from the frequency setting, it's just shows this _ _, when I press the + button to change through the frequencies all it does is give me the expert option and in there a frequency shift option on -152hz, i can go 1 up or down on that, that's it, no 4, 8, 12 or 18 khz options anywhere.

All the other programs have the _ _ too, is it because it I've taken the remote away from detector?
I'm lost on this one, any help pointing me in the right direction would be much appreciated, cheers.

[Danzigman]

Maybe this helps - " onclick="window.open(this.href);return false;

[deltron]

Yep, it wont work away from the coil. Try it again next to it and all will be fine

[GeoffBristol]

Hi What What, I think by putting another program in is just going to confuse you, I think if I'm right in saying that you have only been out once or twice with the Deus, I would have thought that getting used to the factory programs would be more use to you and make you familiar with the machine, just a thought.
Geoff

[What What]

Hi What What, I think by putting another program in is just going to confuse you, I think if I'm right in saying that you have only been out once or twice with the Deus, I would have thought that getting used to the factory programs would be more use to you and make you familiar with the machine, just a thought.
Geoff

Sound advice and that is what I'll do, was just playing around really trying to get to know the remote better.

Cheers.

[Nigel at regtons]

The remote or headphones need to 'talk' to the coil to be able to change frequencies also you refer to 152hz, I think you may be looking at audio frequency (hz) & not operational frequency (Khz) ?

[What What]

The remote or headphones need to 'talk' to the coil to be able to change frequencies also you refer to 152hz, I think you may be looking at audio frequency (hz) & not operational frequency (Khz) ?

Yeah, it's the hz frequency in the expert option on the normal frequency, that's the only option it gives when I have the remote away from the detector, it doesn't give the 4 khz frequency options.