deus factory settings

Forum group discussion of the XP Deus Metal Detector.
Post Reply
vintanto
Posts: 37
Joined: Thu Jul 30, 2009 11:27 pm
Been thanked: 1 time

deus factory settings

Post by vintanto »

hi just got my new deus full, i was wondering if the factory programs are good enough to just start detecting ie recovery depth seperation,i have heard that i can only expect to get between 4-5 inches in factory presets is this true or do i have to tinker with them to get better results if so could anyone send me some programes they use i hunt mainly pasture but also do some beach work
many thanks
Top
whitestone
Posts: 276
Joined: Mon Oct 25, 2010 2:35 pm
Location: Warwickshire
Has thanked: 16 times
Been thanked: 1 time

Post by whitestone »

I can assure you that the Deus factory settings are fantastic and anyone who starts off detecting with the Deus would be well advised to stick to those factory settings until that really understand the machine and its capabilities. As for depth,, I have had the Deus for 3 years now and have found many many great finds at depths far deeper than 4 or 5 inches. Stick to Deus fast or GM Power or Basic 1 and 2 for a while and you will not be disappointed. Good Luck.
NCMD Member
Deus User
Top
vintanto
Posts: 37
Joined: Thu Jul 30, 2009 11:27 pm
Been thanked: 1 time

Post by vintanto »

many thanks for taking the time to answer my question,i will take your advice and put it into action as soon as it bloody well stops raining here [ can you help me with that] lol
Top
User avatar
samuraitrev
Posts: 904
Joined: Fri Dec 13, 2013 5:34 pm
Has thanked: 53 times
Been thanked: 77 times
Contact:
Contact samuraitrev

Post by samuraitrev »

I messed about with custom settings and tweaking things myself and the program I came back to after 2 years of toying with it was GMP it is the best program in my opinion. Go for fast if the area is full of iron.

Happy digging!
Derbyshire based concealed junk removal operative.
Finds of note in 2022 - You know that thing you do when you pull your pockets out to show there's nothing in there? You get the idea.
Top
User avatar
roamingrob
Posts: 3521
Joined: Wed Nov 21, 2012 8:23 am
Location: Derbyshire
Has thanked: 132 times
Been thanked: 519 times

Post by roamingrob »

Is it running in V3.2 or the new V4 ? A great detector
XP Deus ll, 11" coil SW6
XP MI6 pin pointer
Hybrid Spade
" SEEK AND YE SHALL FIND"
FB page https://www.facebook.com/Roamingrob-Hig ... 069738277/
Top
User avatar
john Colin
Posts: 956
Joined: Tue Feb 03, 2015 3:18 pm
Location: SW Devon
Has thanked: 656 times
Been thanked: 478 times

Post by john Colin »

samuraitrev wrote:I messed about with custom settings and tweaking things myself and the program I came back to after 2 years of toying with it was GMP it is the best program in my opinion. Go for fast if the area is full of iron.

Happy digging!
Excellent advice.
Top
Oxgirl36

Post by Oxgirl36 »

john Colin wrote:
samuraitrev wrote:I messed about with custom settings and tweaking things myself and the program I came back to after 2 years of toying with it was GMP it is the best program in my opinion. Go for fast if the area is full of iron.

Happy digging!
Excellent advice.
I second that ::g
Top
vintanto
Posts: 37
Joined: Thu Jul 30, 2009 11:27 pm
Been thanked: 1 time

Post by vintanto »

once again your answers are very much appreciated,just got the machine a week ago its the v3.2
should it have being the v4,or is it simple to up grade.
Top
Post Reply

Return to “XP DEUS Forum”

Who is online

Users browsing this forum: No registered users and 90 guests