keep an eye on ground balance

[Tomo]

Had a really struggling day yesterday finds wise while Roman bronze,s popped out left right and centre for other members. I put it down to the walk over factor and kept trying. While checking a target for the missus I noticed I couldn't pick up this target while she could with the power ? I checked the settings and noticed the ground balance was reading way low while I was still on 90. I'd only forgot to keep it a few notches above all day, no wonder wasn't picking anything up. I quickly lowered it from 90 to 75 and straight away my Mrs detector started to make mine go crackers and alot more sensitive and I tried again and it picked up the signal that it didn't see a minute before. I then walked 3 foot and bang, a Roman bronze straight away and noticed I was picking up alot more stronger signals. Every signal after adjusting the GB seemed sharper and clearer after that. Can't believe I'd forgot to keep a check on the GB throughout the day rl;

[Oldest Swinger]

As long as there not too much iron I always use tracking or if there lots of iron I keep within 5 of actual conditions
Keep swinging Paul

[Tomo]

As long as there not too much iron I always use tracking or if there lots of iron I keep within 5 of actual conditions
Keep swinging Paul

I think it was deus who said keep it 2 above the actual reading on 3.2

[Fisher1266X]

You may find this interesting.....http://www.metaldetectingforum.co.uk/vi ... 39&t=54175

Paul

[JBM]

As long as there not too much iron I always use tracking or if there lots of iron I keep within 5 of actual conditions
Keep swinging Paul

I agree with Paul as would many of my Deus friends.

It works for us. Jerry.

[Tomo]

Thanks guys. Always willing to listen and learn